HP L2311C - Manual

2 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and otherattached devices, then follow the instructions below. Unfolding the Monitor Pedestal Base 1. Lift the monitor from its box and place it face down on a flat surface. 2. Hold d...

Connecting the Monitor Cables 1. Place the monitor in a convenient, well-ventilated location near the computer. 2. Remove the cable management clip from the pedestal by pulling outward on the two sides of theclip (1) then lifting the clip off the pedestal (2). Figure 2-3 Removing the Cable Managemen...

8. Secure the cables in place with the cable management clip. Press the clip straight down on thecurved neck of the pedestal ensuring that the tabs on the sides of the clip snap into the slots onthe pedestal. Figure 2-7 Installing the Cable Management Clip Turning on the Monitor 1. Press the power b...

Charging Your HP Notebook Computer The monitor includes a 90W DC power out port that can be used to charge your HP notebookcomputer. NOTE: The charging system supplies up to 90 watts of power. HP notebooks requiring more than 90 watts may not be charged by the system. Only HP notebooks are supported...

Connecting Optional USB Devices The monitor includes a USB 3.0 hub with two external USB 2.0 ports on the rear panel and two USB3.0 ports on the side panel. Connect USB 2.0 devices, such as a keyboard and mouse, to the USB2.0 ports on the rear panel. Connect USB 3.0 devices to the USB 3.0 ports on t...

Front Panel Controls Figure 2-11 Monitor Front Panel Controls Table 2-1 Monitor Front Panel Controls Control Function 1 Webcam with Dual Microphone Array Active = Blue LED 2 Menu Opens, selects or exits the OSD menu. 3 Minus If the OSD menu is on, press to navigate backward throughthe OSD menu and d...

Adjusting the Monitor Your monitor model may look different than the model in the following illustrations. 1. Tilt the monitor's panel forward or backward to set it to a comfortable eye level. Figure 2-12 Tilting the Monitor 2. Swivel the monitor to the left or right for the best viewing angle. Figu...

Removing the Monitor Pedestal Base You can remove the monitor panel from the pedestal base to install the panel on a wall, a swing arm,or other mounting fixture. CAUTION: Before beginning to disassemble the monitor, be sure the monitor is turned off and the power and signal cables are disconnected. ...

Mounting the Monitor The monitor panel can be attached to a wall, swing arm, or other mounting fixture. NOTE: This apparatus is intended to be supported by UL or CSA Listed wall mount bracket. 1. Remove the monitor panel from the pedestal base. Refer to Removing the Monitor Pedestal Base on page 17 ...

3 Using the Webcam Install CyberLink YouCam software and driver from the CD that came with your monitor. NOTE: USB connectivity between the monitor and PC is required for the webcam to operate. The webcam will not operate if you are using the VGA cable for the graphics interface. Use your webcam to:...

Before you can set up a video chat: 1. Download an Internet messenger or video phone call program. Make sure the person you arecalling has compatible video-calling software. 2. Enable your webcam as the default video input. This is usually done through the video setup inthe Tools menu in the softwar...

4 Using HP MyRoom HP MyRoom is your online meeting room. Connect with business colleagues “face to face” andcollaborate with useful tools. Installing HP MyRoom from the CD To install HP MyRoom: 1. Insert the CD that came with your monitor into the computer CD-ROM drive. 2. Select Install HP MyRoom a...

5 Finding More Information Refer to the HP LCD Monitors Reference Guide included on the CD with your monitor for additional information on: ● Optimizing monitor performance ● Safety and maintenance guidelines ● Installing software from the CD ● Using the OSD menu ● Downloading software from the Web ...

6 Technical Specifications NOTE: All specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either higher or lower. L2311c Table 6-1 L2311c Specifications Maximum Weight (Unpacked) 6.8 kg 15.0 lbs Dimensions (include base) Height (hi...

Recognizing Preset Display Resolutions The display resolutions listed below are the most commonly used modes and are set as factorydefaults. This monitor automatically recognizes these preset modes and they will appear properlysized and centered on the screen. L2311c Table 6-2 Factory Preset Modes P...