HP L1740 17 - Manual

2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with your monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with your monitor, refer to the “Power Cord ...

Safety and Maintenance Guidelines Ä CAUTION: For the protection of your monitor, as well as your computer, connect all power cords for your computer and its peripheral devices (such as a monitor, printer, scanner) to some form of surge protection device such as a power strip or Uninterruptible Power...

Safety and Maintenance Guidelines ■ Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or covered. Never push objects of any kind into cabinet slots or other openings. ■ Do not drop your monitor or place it on an unstable surface. ■ Do not allow anythi...

3 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the steps below. Unfolding the Monitor Base The monitor is shipped with the base attached in a folded flat position. To begin using the monitor...

Setting Up the Monitor Identifying Rear Panel Components Rear Panel Components No. Component Function 1 AC power connector Connects the AC power cord to the monitor. 2 USB downstream connectors Connects optional USB devices to the monitor. 3 USB upstream connector Connects the USB cable to the host ...

Setting Up the Monitor Selecting the Signal Connectors and Cables There are two signal input connectors: ■ VGA connector ■ DVI-D connector (available on select models) The monitor will automatically determine which inputs have valid video signals. The inputs can be selected through the On-Screen Dis...

Setting Up the Monitor Removing the Monitor Base The monitor base can be removed to mount the monitor on a wall, a swing arm or other mounting fixture. Read the caution and warning statements below before beginning the procedure. Ä CAUTION: Before beginning to disassemble the monitor, be sure the mo...

Setting Up the Monitor 2. Remove the four screws 1 from the monitor base. 3. Remove the monitor base 2 from the monitor. Removing the Monitor Base Mounting the Monitor 1. Remove the monitor base. Refer to “Removing the Monitor Base” steps in the previous section. ✎ For stand mounting purposes, when ...

4 Operating the Monitor Software and Utilities The monitor includes a CD that contains two files you can install on your computer: ■ an .INF (Information) file ■ an .ICM (Image Color Matching) file Adobe Acrobat Reader is supplied on this CD and can be installed from the menu. ✎ If the monitor does ...

Operating the Monitor work through separate BNC type connectors or through distribution buffers/boxes. You may need to install the .INF file if these conditions are not met. The Image Color Matching File The .ICM file provides accurate color representation. The .ICM files are data files that are use...

Operating the Monitor 6. Ensure that the proper resolution and refresh rates appear in the Windows Display control panel. ✎ You may need to install the digitally signed monitor .INF and .ICM files manually from the CD in the event of an installation error. Refer to the INF and ICM Readme file on the...

Operating the Monitor Front Panel Controls Front Panel Controls No. Control Function 1 Auto Adjust Activates the auto adjustment feature for optimum image. 2 Menu Opens the On-Screen Display (OSD) menu. 3 – ( Minus) • If OSD is on, press to navigate backward through the OSD menu features and decreas...

Operating the Monitor Adjusting Monitor Settings Use the On-Screen Display (OSD) to adjust the screen image based on your viewing preferences. To access the OSD, do the following: 1. If the monitor is not already on, press the Power switch to turn on the monitor. 2. Press the Menu button on the moni...

Operating the Monitor 6. After adjusting the function, select Save and Return, or Cancel if you don’t want to save the setting, then select Exit from the Main Menu. ✎ If the buttons remain untouched for 10 seconds while displaying a menu, the new adjustments will be saved when the OSD automatically ...

Operating the Monitor Adjusting Screen Quality Allow the monitor to warm up for 20 minutes before performing the following procedures. The Auto-adjustment feature automatically fine-tunes the image quality each time a new video mode is utilized. If additional improvement is desired, press the Auto a...

Operating the Monitor ✎ When adjusting the Clock and Clock Phase values, if the monitor images become distorted, continue adjusting the values until the distortion disappears. To restore the factory settings, select Yes from the Factory Reset menu in the on-screen display. Identifying Monitor Condit...

Operating the Monitor Sleep Timer Mode The Sleep Timer mode is an energy-saving feature that enables you to set a time for the monitor to power on and off at the same time every day. This also extends the life of the backlight bulbs in the monitor. The Sleep Timer has five settings: ■ Set Current Ti...

Operating the Monitor 9. Press the Menu button to lock in the time chosen. 10. After setting the current time, the highlight automatically skips to Set Sleep Time hours. Repeat steps 6 through 9 to set Sleep Time. 11. If you do not want to set Sleep Time, press the Menu button twice, then select Sav...

Operating the Monitor Changing the Color Temperature 1. Press the Menu button on the front panel of the monitor to launch the Main Menu of the OSD. 2. Select Advanced Menu to access all options in the Main Menu. 3. Select Color to display the Color Temperature menu. 4. Select sRGB. 5. Select Save an...

A Troubleshooting Solving Common Problems The following table lists possible problems, the possible cause of each problem, and the recommended solutions. Problem Possible Cause Solution Screen is blank. Power cord is disconnected. Connect the power cord. Power switch on front panel of the monitor is...

Troubleshooting Using the Worldwide Web For online access to technical support information, self-solve tools, online assistance, community forums of IT experts, broad multivendor knowledge base, monitoring and diagnostic tools, go to: http://www.hp.com/support . Preparing to call Technical Support I...

B Technical Specifications ✎ All performance specifications are provided by the component manufacturers. Performance specifications represent the highest specification of all HP’s component manufacturers’ typical level specifications for performance and actual performance may vary either higher or l...

Technical Specifications L1940 Flat Panel Monitor (Continued) Relative Humidity 20 to 80% Power Source 100 - 240 VAC, 60-50 Hz Power Consumption <70 watts typical Input Terminals 15-pin D-type connector with cable included. DVI-D connector with DVI-D cable not included (available on select models...

Technical Specifications Factory Preset Display Modes (Continued) Preset Pixel Format Horz Freq (kHz) Vert Freq (Hz) 9 1024 x 768 48.4 60.0 10 1024 x 768 56.5 70.0 11 1024 x 768 60.0 75.0 12 1152 x 870 68.7 75.0 13 1152 x 900 71.7 76.0 14 1280 x 1024 64.0 60.0 15 1280 x 1024 80.0 75.0 Entering User ...

Technical Specifications Energy Saver Feature When the monitor is in its normal operating mode, the monitor uses less than 70 watts of power and the Power light is green. The monitor also supports a reduced power state. The reduced power state will be entered into if the monitor detects the absence ...

C Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a res...

Agency Regulatory Notices Cables Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC Rules and Regulations. Declaration of Conformity for Products Marked with FCC Logo, United States Only This device complies with Part 15...

Agency Regulatory Notices Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Avis Canadien Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. European No...

Agency Regulatory Notices Japanese Notice Korean Notice EPA Energy Star Compliance Monitors that are marked with the Energy Star Logo meet the requirements of the EPA Energy Star program. As an Energy Star Partner, Hewlett Packard Company has determined that this product meets the Energy Star guidel...

Agency Regulatory Notices Power Cord Set Requirements The monitor power supply is provided with Automatic Line Switching (ALS). This feature allows the monitor to operate on input voltages between 100-120V or 200-240V. The power cord set (flexible cord or wall plug) received with the monitor meets t...