HP E2P19AA#ABA - Manual

Front components Component Function (1) Webcam Records video and captures still photographs (2) Internal microphone Records sound (3) Webcam light On: The webcam is in use (4) Volume up button Increases volume (5) Volume down button Decreases volume (6) Brightness up button Increases display brightn...

2 Setting up the hardware You can install the all-in-one on a desktop or mount it to a mounting fixture such as a wall mount orswing arm. Be sure to place the all-in-one in a convenient, well-ventilated location. Connect thecables after you have installed the all-in-one to a mounting fixture. To set...

Connecting the cables The cable connections required depend on whether you are using a keyboard and mouse or wired(Ethernet) or wireless connection. 1. Place the all-in-one in a convenient, well-ventilated location. 2. Remove the rear I/O cover from the all-in-one. 3. If you want to use a wired netw...

Adjusting the tilt For optimal viewing, adjust the screen tilt to your own preference. 1. Face the rear of the all-in-one and hold it so that you do not topple it while changing the tilt. 2. Without touching the screen, adjust the tilt by rotating the stand up and down. 10 Chapter 2 Setting up the h...

Turning on the all-in-one for the first time NOTE: For a seamless experience, the Startup Wizard requires an internet connection. Before powering on the all-in-one, please be prepared to establish a wired (Ethernet) or wireless (Wi-Fi)internet connection. After connecting the cables, press the power...

Using the touchscreen A touch screen device allows you to control items on the screen directly with your fingers. TIP: On touch screen devices, you can also perform on-screen actions with a keyboard and mouse. One-finger slide The one-finger slide is mostly used to pan or scroll through lists and pa...

Rotating Rotating allows you to turn items such as photos. Anchor the forefinger of your left hand on the object you want to rotate. Using your right hand, slideyour forefinger around in a sweeping motion from 12 o’clock to 3 o’clock. To reverse the rotation,move your forefinger from 3 o’clock to 12...

Connecting to networks You can connect to networks with either a wired (Ethernet) or wireless (Wi-Fi) connection. You cannotenable Ethernet and Wi-Fi connections at the same time. Connecting to wireless networks The all-in-one’s wireless network capability lets you connect the all-in-one to wireless...

Connecting to wired networks Use a LAN connection if you want to connect the all-in-one directly to a router in your home (insteadof working wirelessly), or if you want to connect to an existing network at your office. Connecting to a LAN requires an 8-pin, RJ-45 network cable. To connect to a wired...

3 Using the user interface The Home page is displayed when the all-in-one is powered on. An Android operating system usesapps to perform most tasks. NOTE: The user interface icons for your operating system may look different from the icons shown in the user guide. Google apps KingSoft Office Email G...

Return to the previous screen. Return to the Home page. Display a list of open apps. Browsing the internet The all-in-one uses the Google Chrome web browser that supports HTML5 and JavaScript to browsethe Internet. You must have Internet access to browse the Internet. NOTE: Google Chrome does not su...

4. Select Set date to manually set the date. 5. Select Set time to manually set the time. Security settings Several security settings are available for your all-in-one. To set up security settings: 1. Select the All Apps icon from the Home page, and then select Settings . 2. Select Security . 3. Cho...

Factory data reset You can reset the all-in-one to its original factory data settings. This action erases all data from yourall-in-one’s internal storage. To reset to factory data: 1. Select the All Apps icon from the Home page, and then select Settings . 2. Select Backup & reset . 3. Under Pers...

4 Safety and Maintenance Guidelines Important Safety Information A power cord is included with the all-in-one. If another cord is used, use only a power source andconnection appropriate for this all-in-one. For information on the correct power cord set to use withthe all-in-one, refer to the Power C...

5 Frequently asked questions Question Answer How do I surf the Internet? Connect to a wired (Ethernet) or wireless (Wi-Fi) networkand use one of the two pre-installed browser options. Once you have established an Internet connection, select theAll apps icon on the Home screen. Two browser options ar...

6 Product support For additional information on using your all-in-one, go to http://www.hp.com/support . Select your country or region, select Product Support & Troubleshooting , and then enter your model in the SEARCH window. NOTE: The user guide, reference guide, and drivers are available at h...

7 Technical specifications NOTE: All specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either higher or lower. Specifications are subject tochange. The complete and latest specifications on display products are available on http...

A Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a resid...

European Union Regulatory Notice Products bearing the CE marking comply with one or more of the following EU Directives as may beapplicable: ● Low Voltage Directive 2006/95/EC; EMC Directive 2004/108/EC; Ecodesign Directive 2009/125/EC; R&TTE Directive 1999/5/EC; RoHS Directive 2011/65/EU ● Comp...

Power Cord Set Requirements The all-in-one power supply is provided with Automatic Line Switching (ALS). This feature allows theall-in-one to operate on input voltages between 100–120V or 200–240V. The power cord set (flexible cord or wall plug) received with the all-in-one meets the requirements fo...

with ENERGY STAR qualified computers and displays. The default power management settings onENERGY STAR® qualified computers are preset to behave in the following ways when the system isoperating on AC power: ● Turn off an external display after 15 minutes of user inactivity ● Initiate a low power sl...

Ukraine Restriction of Hazardous Substances The equipment complies with requirements of the Technical Regulation, approved by the Resolutionof Cabinet of Ministry of Ukraine as of December 3, 2008 No. 1057, in terms of restrictions for the useof certain dangerous substances in electrical and electro...