Page 2 - Notice; is a trademark of Intel Corporation.
Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not ...
Page 3 - General information to read before installing; Sound conflict under Win 95 on VLi8 only
General information to read before installing General information to read before installing • On all systems : Before installing LAN card, go into Bios setup and set PnP OS field to NO. • How to change LAN card configuration if needed (Advanced users only) This is a general advisory on how to forcib...
Page 4 - Press F2 to go to CMOS setup.
General information to read before installing 2 Press F2 to go to CMOS setup. 3 Set PNP OS to NO and reserve IRQ 5. 4 Save settings and boot to applicable OS.
Page 5 - Power on the system and start Windows 95SR2.5.; Device Configuration
1 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Microsoft Windows 95 SR2.5 1 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Microsoft Windows 95 SR2.5 Connecting to a Windows NT 3.51 Server Requirements • HP Vectra with Windows 95 SR2.5. • 3COM EtherLink III 3C...
Page 6 - Connecting to a Windows NT 3.51 Server; NOTE
1 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a Windows NT 3.51 Server 9 Remove the 3COM 3C509B driver disk and reboot the system to Windows 95SR2.5. 10 Windows 95SR2.5 will automatically recognize the 3COM 3C509B network adapter as “3Com 3C509B EtherLink III”. 11...
Page 7 - Requirements; Procedure
2 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Microsoft Windows 95 SR2.5 2 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Microsoft Windows 95 SR2.5 Connecting to a Windows NT 4.0 Server Requirements • HP Vectra with Windows 95 SR2.5. • 3COM EtherLink III 3C5...
Page 8 - Connecting to a Windows NT 4.0 Server; Click on “YES” to restart the system when prompted.
2 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a Windows NT 4.0 Server 10 Windows 95SR2.5 will automatically recognize the 3COM 3C509B network adapter as “3Com 3C509B EtherLink III”. 11 Insert the 3COM 3C509B driver disk in the floppy drive and click on “Next” from...
Page 10 - Connecting to a NetWare 3.12 Server
3 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a NetWare 3.12 Server 9 Remove the 3COM 3C509B driver disk and reboot the system to Windows 95SR2.5. 10 Windows 95SR2.5 will automatically recognize the 3COM 3C509B network adapter as “3Com 3C509B EtherLink III”. 11 In...
Page 11 - Novell NetWare Client
3 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a NetWare 3.12 Server 26 Novell NetWare Client Novell NetWare Client3COM Etherlink III Bus-Master PCI Ethernet AdapterIPX 32-bit Protocol for the Novell NetWare ClientIPX/SPX-compatible ProtocolNetBEUI 27 When prompted...
Page 13 - Connecting to a NetWare 4.11 Server
4 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a NetWare 4.11 Server 9 Remove the 3COM 3C509B driver disk and reboot the system to Windows 95SR2.5. 10 Windows 95SR2.5 will automatically recognize the 3COM 3C509B network adapter as “3Com 3C509B EtherLink III”. 11 In...
Page 15 - Microsoft Windows NT 4.0 Workstation
5 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Microsoft Windows NT 4.0 Workstation 5 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Microsoft Windows NT 4.0 Workstation Connecting to a Windows NT 3.51 Server Requirements • HP Vectra with Windows NT 4.0 Workst...
Page 17 - Click on “Finish” to complete the installation.
5 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a Windows NT 3.51 Server 26 Specify your Computer Name, Workgroup or Domain (Contact your network administrator if you do not have the required information) and click on “Next”. 27 Click on “Finish” to complete the ins...
Page 22 - Connecting to a Novell NetWare 3.12 Server
7 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a Novell NetWare 3.12 Server 8 Log onto Windows NT4 Workstation with administrator privileges (Contact your network administrator if you do not have the required information). 9 Right-click on the “Network Neighborhood...
Page 25 - Connecting to a Novell NetWare 4.11 Server
8 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a Novell NetWare 4.11 Server 8 Log onto Windows NT4 Workstation with administrator privileges (Contact your network administrator if you do not have the required information). 9 Right-click on the “Network Neighborhood...
Page 27 - Microsoft Windows NT 3.51 Workstation
9 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Microsoft Windows NT 3.51 Workstation 9 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Microsoft Windows NT 3.51 Workstation Connecting to a Windows NT 3.51 Server Requirements • HP Vectra with Windows NT 3.51 Wor...
Page 28 - Open the “Network” icon in the “Control Panel” program group.
9 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a Windows NT 3.51 Server 8 Log onto Windows NT3.51 Workstation with administrator privileges (Contact your network administrator if you do not have the required information). 9 Open the “Network” icon in the “Control P...
Page 33 - Install the Windows NT3.51 Service Pack 5 application.
11 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a Novell NetWare 4.11 Server 26 Click on the “Reboot” button to restart the machine for the changes to take effect. 27 Install the Windows NT3.51 Service Pack 5 application.
Page 34 - Microsoft Windows for Workgroups 3.11
12 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Microsoft Windows for Workgroups 3.11 12 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Microsoft Windows for Workgroups 3.11 Connecting to a Windows NT 4.0 Server Requirements • HP Vectra with MS-DOS and MS-Wind...
Page 35 - At the “Network Setup” dialog box, click on “OK”.
12 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a Windows NT 4.0 Server 10 Click on the “Install Microsoft Windows Network:” option, and click “OK”. 11 Click on the “Drivers” button from the “Network Setup” dialog box, and click on “Add Adapter”. 12 Click “OK” to a...
Page 37 - Select “OTHER DRIVERS”from the Network Board selection.
13 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a Novell NetWare 4.11 Server 9 Select option 5 “Select the driver for your network board” and press “Enter”. 10 Select “OTHER DRIVERS”from the Network Board selection. 11 Insert the 3COM 3C509B driver disk into the fl...
