HP 367055-002 - Manual

1–4 Reference Guide Getting Started Identifying Right-Side Components Component Description 1 Computer eject button and docking light Ejects the computer from the docking station. Docking light is turned on when the computer is properly aligned. ✎ Refer to Chapter 2, “ Docking and Undocking ,” for d...

Getting Started Reference Guide 1–5 Identifying Rear Components Component Description 1 Security cable slot Connects an optional security cable lock. 2 Monitor stand port Connects an optional HP Monitor Stand to the docking station. 3 Audio-out (headphone) jack Connects an audio output device such a...

Getting Started Reference Guide 1–7 Getting More Information Å WARNING: To reduce the risk of serious injury, read the Safety and Comfort Guide. It describes proper workstation setup, and proper posture, health, and work habits for notebook users. The Safety and Comfort Guide also provides important...

Reference Guide 2–1 2 Docking and Undocking Connecting to AC Power Connect the docking station to AC power at all times. Å WARNING: To reduce the risk of electric shock or damage to your equipment: ■ Plug the power cord into an AC outlet that is easily accessible at all times. ■ Disconnect the power...

Docking and Undocking Reference Guide 2–3 Docking the Computer 1. Close the computer. If you close the computer when the power is on, the computer may enter standby mode. To resume operation after docking, open the computer, and then press the power button. 2. Angle the front of the computer downwar...

Docking and Undocking Reference Guide 2–5 Undocking the Computer 1. Close the computer. If you close the computer when the power is on, the computer may enter standby mode. To resume operation after undocking, open the computer, and then press the power button.

Reference Guide 3–1 3 Using the Docking Station Turning the Computer On and Off When you connect a computer to the docking station, you can turn the computer on and off using either the computer power button or the docking station power button 1 . When you turn on the system, the power button light ...

3–2 Reference Guide Using the Docking Station Installing the HP/Kensington Cable Lock ✎ Security solutions are designed to act as deterrents. These deterrents may not prevent a product from being mishandled or stolen. The HP/Kensington Cable Lock (purchased separately) allows you to secure the docki...

Reference Guide A–1 A Troubleshooting This section provides three methods for resolving issues you may encounter when using your docking station. Use the methods in the following order: ■ Refer to the “ Solving Common Problems ” section. ■ Access the Help and Support Center on your computer by selec...

A–2 Reference Guide Troubleshooting Solving Common Problems Docking Problems Problem Possible Cause Solution The computer is not properly connected to the docking station. The computer may be properly aligned, but is not fully seated or docked in the docking station. Lift the computer away from the ...

Troubleshooting Reference Guide A–3 Undocking Problems Problem Possible Cause Solution The computer will not disconnect from the docking station. The connectors are jammed. Press the eject button all the way in. If the computer does not disconnect, repeat this procedure to disconnect the computer. Ä...

A–4 Reference Guide Troubleshooting External Device Problems Problem Possible Cause Solution A new device is not recognized as part of the system. The computer may be properly aligned, but is not fully seated or docked in the docking station. Lift the computer away from the docking station. Then rea...