HP 2nd edition - Manual
HP 2nd edition – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Guide, which is available online at; Requirements; Enterprise Edition
- Page 4 – Hardware; Fibre Channel Cables; or; Software; Migration procedures; system before removing power.; your existing configuration.
- Page 5 – Task 1: Removing the Modular Smart Array 500 Controller; Task 2: Inserting the Modular Smart Array1000 Controller; Insert the Modular Smart Array 1000 Controller into the chassis
- Page 6 – into the same slot as the active controller
- Page 7 – Cancel
- Page 8 – My Computer
- Page 9 – Troubleshooting tips; Methodology; Conclusion
- Page 10 – For more information; information that might be helpful in planning a SAN migration.; Product information
- Page 11 – Call to action; at this Internet address:
Converting Modular Smart Array 500 to a Modular Smart
Array 1000 SAN for additional scalability
HOWTO, 2
nd
edition
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Figure 2. Hot-pluggable Modular Smart Array 500 controller To add redundant controllers, redundant switches, and redundant Host Bus Adapters (HBA), or to setup other advanced configurations, refer to the HP StorageWorks Modular Smart Array 1000 User Guide, which is available online at http://h18000....
Table 1. Minimum hardware requirements 5 Hardware FCA2101 HBA, FCA2210, FCA2214 Fibre Channel Cables Modular Smart Array 1000 Controller 1 Modular Smart Array Fibre Channel I/O Module 2 or MSA SAN Switch 2/8 Table 2. Minimum software requirements 5 Software MSA1000 Firmware (available for ...
Task 1: Removing the Modular Smart Array 500 Controller (See Figure 3) 1. Press the controller’s thumb latch, and pull the latch handle toward you X . 2. Remove the Modular Smart Array 500 Controller by pulling it straight out of the chassis Y . Figure 3. Removing the Modular Smart Array 500 Control...