Page 3 - Agency Regulatory Notices; Federal Communications Commission Notice; Modifications
Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resid...
Page 5 - Product Environmental Notices; Restriction of Hazardous Substances (RoHS; Monitor Placement Considerations
Product Environmental Notices Materials Disposal This HP product contains mercury in the fluorescent lamp in the display LCD that might require special handling at end-of-life. Disposal of this material can be regulated because of environmental considerations. For disposal or recycling information, ...
Page 6 - Table of Contents
1 Table of Contents Safety Instructions ............................................................................................................... 2 Recycling Information .......................................................................................................... 3 System componen...
Page 7 - Safety Instructions
2 Safety Instructions Please keep the display away from any heat sources such as electric radiators or direct sunlight. Place the display in a stable and well-ventilated place. The holes or openings on the display are designed for ventilation. Do not cover or block the ventilation holes or openi...
Page 8 - Recycling Information
3 Recycling Information HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, go to http://www.hp.com/recycle.
Page 9 - System components and accessories
4 System components and accessories Use the provided stylus as a touch pointing device. However, the stylus is not required for optical touch applications; for example, finger and other pointing instruments may be used. If any component is missing, please contact your local dealer for technical supp...
Page 10 - Connection instructions; Installing the display; Important; Adjusting the viewing angle
5 Connection instructions Installing the display Install: Remove: Place the display on the table (Figure 1) Packaging procedures If you need to package the display again, please keep the original carton and packing materials. The procedures for re-packaging the display are as follows: 1. Unplug the ...
Page 12 - Using the display; Turning on the display
7 Using the display Turning on the display Turn on the display before turning on the computer. When the power is on, the LED on the power button lights blue and the screen image will appear after about 10 seconds. If the LED doesn't light blue or no image appears, please verify if the display is pro...
Page 13 - Operating the Touch Screen; Touch Software Installation for Microsoft Windows XP
8 Operating the Touch Screen Touch Software Installation for Microsoft Windows 7 and Windows Vista (Plug and Play) Windows touch and multi-touch gestures are supported in Microsoft Windows 7 Home Premium, Professional, Enterprise, and Ultimate Operating System Editions only. Multi-touch is not suppo...
Page 14 - Install
9 Installing the Touch Driver from the CD (for Windows XP only) Insert the CD-ROM into the computer CD-ROM drive. The CD menu is displayed (or open Windows Explorer and run the Touch_Driver_Setup.exe from the CD). 1. Click “ Install Touch Driver for Microsoft Windows XP ” from the CD menu. NOTE: The...
Page 15 - “Finish”
10 3. Click “Finish” The driver setup installation is complete. 4. Click “Yes” After clicking Finish, the setup wizard will prompt you to reboot the computer. Once the system is restarted, the installation is complete . Installing the Touch Driver from the Internet (for Windows XP only) To install t...
Page 16 - Control of the Touch Function; in the figure below.
11 Control of the Touch Function NOTE: 1. Before using the touch function, make sure the USB cable is connected, the touch applications from the CD are installed (if you are running Windows XP) and the Window's operating system is started. 2. When the touch function is active, make sure there is no ...
Page 17 - Tablet PC Settings; Display
12 Using the Extended Display Setup Microsoft Windows 7 Operating Systems (Home Premium, Professional, Enterprise and Ultimate Editions) support extended display touch screen functions for two monitors connected to one system. 1. Make sure a USB cable is connected from the computer to each monitor. ...
Page 18 - Calibrate...
13 5. Click on the Calibrate… button. Perform a calibration on each monitor separately. NOTE: If you have two monitors that are the same model, be sure to note which model is calibrated first, as both will appear with identical names. Microsoft Windows XP and Windows Vista do not support extended di...
Page 19 - OSD selection; OSD Menu; COLOR
14 OSD selection Press the Menu button to activate the OSD function menu and continue pressing the Menu button to select an option from the 7 functions in the menu. Select the function you want to adjust on the OSD function menu and then press MENU to make adjustment. Please use <or> to adjust...
Page 21 - Troubleshooting
16 Troubleshooting Problems Possible solutions Power LED doesn't light up. Check if the power switch is in the ON position Make sure the power cord is properly connected No screen image Check if the power switch is in the ON position Make sure the power cord is properly connected Make sure...
Page 22 - Touch Screen Troubleshooting Tips
17 Touch Screen Troubleshooting Tips Problems Possible Solutions Computer does not recover from sleep mode when the touch screen is touched Sleep mode recovery is not supported by the touch screen. Use the keyboard or mouse to recover from the computer ‘s sleep mode. The USB cable is quickly removed...
Page 23 - Production Specifications
18 Production Specifications LCD panel size 54.61 cm(21.5in) DCR 3000:1 (typical) Viewing angle Horizontal 170°, vertical 160° (typical) Response time 5 ms (typical) Brightness 265 cd/m 2 (typical) Input signal Analog signal (D-sub); digital signal (DVI) Display color 16.7 M colors Frequency 24 ~ 83...
Page 24 - Preset Modes
19 Preset Modes Preset Pixel Horz Freq (kHz) Horz Polarity Vert Freq (Hz) Vert Polarity Pixel Clk (MHz) Source 1 640 x 480 31.469 - 59.940 - 25.175 VGA 2 720 x 400 31.469 - 70.087 + 28.322 VGA 3 800 x 600 37.879 + 60.317 + 40.000 VESA 4 1024 x 768 48.363 - 60.004 - 65.000 VESA 5 1280 x 720 45.00 + 6...
Page 25 - Appendix; Connector pin assignment
20 Appendix Connector pin assignment 15 pin color display signal cable: PIN No. Description PIN No. Description 1. Red 9. +5V 2. Green 10. Logic ground 3. Blue 11. Monitor ground 4. Monitor ground 12. DDC-serial data 5. DDC-return 13. H-sync 6. R-ground 14. V-sync 7. G-ground 15. DDC-serial time s...
