Hotpoint SY23 - Manual

Hotpoint SY23

Hotpoint SY23 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
Page: / 21

Table of Contents:

  • Page 4 – Preparation of the oven and pre-use
  • Page 5 – INSTRUCTIONS FOR INSTALLATION; and
  • Page 7 – an opening for air to enter the area in conformity with current law.; ELECTRICAL CONNECTION; the observance of the safety rules.
  • Page 8 – marked ‘L’ or coloured
  • Page 9 – CONNECTION TO THE GAS SUPPLY; ) between the pipe-fitting and the pipe. The seal is provided; Important; when finished, check that there are no gas leaks.; DO NOT USE OPEN FLAMES WHEN SEARCHING FOR GAS LEAKS.; because it cannot be inspected.
  • Page 10 – Adapting to the gas in use; Reassemble the burner in the oven and the oven bottom.; Changing the grill burner injector; Reassemble the burner.
  • Page 11 – Adjusting the minimum; opening, which is on the left side of the knobs
  • Page 12 – BEFORE USING THE OVEN; Remove the cardboard protection and the protective plastic film.
  • Page 14 – SWITCHING THE GAS GRILL ON; To switch the gas grill on, proceed as follows:; During grill operation:; The oven door must be kept open and the knob protection fitted.; The grill has an electronic ignition.; OVEN LIGHT; The oven light turns on when turning the knob clockwise.
  • Page 15 – ELECT R ONI C CLOCK
  • Page 16 – CLEANING THE APPLIANCE; void chloride-based products such as bleach.
  • Page 17 – REMOVING THE OVEN DOOR; To facilitate cleaning inside the oven, the door can be removed; Remember to rotate the two movable bolts B; used to hook; WARNING
  • Page 18 – REPLACING THE OVEN LIGHT; he appliance can be equipped with side guides which have
  • Page 19 – INSTRUCTIONS FOR INSTALLING KNOB GUARD
Loading the manual

Instructions for Installation and Use

Built-In Gas Oven

SY23

To the User:

You must read the instructions prior to installing and using the appliance and

then retain them for future reference.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 4 - Preparation of the oven and pre-use

All work on the appliances must be carried out by qualified personnel. For maintenance, moving, installation and cleaning of the appliance use suitable prevention and protection equipment (gloves, etc.). Lifting and moving of appliances weighing more than 25 kg must be carried out using proper equip...

Page 5 - INSTRUCTIONS FOR INSTALLATION; and

INSTRUCTIONS FOR INSTALLATION It is important that all installation procedures be performed by a qualifiedtechnician.After unpacking the oven to connect it, rest it on its base without damaging it.Do not lift the oven by the door handle, but hold it at the sides. Do not lift the oven by the gas conn...

Page 7 - an opening for air to enter the area in conformity with current law.; ELECTRICAL CONNECTION; the observance of the safety rules.

INSTALLATION Installation location In order for the gas unit to work properly it is essential that the air necessary for burningthe gas flows into the area naturally. The installer must follow the safety norms for the country of installation.The flow of air into the area must come directly through o...

Other Hotpoint Models