Hotpoint RZM61 - Manual
Hotpoint RZM61 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – For Your Safety; For your safety, read the following advice:; Only use this freezer for storing domestic foodstuffs.
- Page 3 – Installation; Location & Air Circulation; Prolong the life of the freezer.
- Page 4 – Floor of the freezer compartment
- Page 5 – Electrical Supply; Earth
- Page 6 – Controls; Controlling the Temperature of the Freezer Compartment
- Page 7 – Indicator Lights
- Page 8 – Maximum freezing capacity 16kg in 24 hours; Pre-Freeze chart when selecting Fast Freeze:
- Page 9 – Useful Advice; Frozen Food Storage Capacity
- Page 10 – Ensure food is labelled and dated before placing in freezer.; Storing Food in a Freezer; Avoid opening the door unnecessarily or for longer than needed.
- Page 12 – Defrosting; inch) Hotpoint recommend ‘fully defrosting your freezer’.; Fully defrosting your freezer.; Remove the storage drawers
- Page 13 – Cleaning; Note : Leave the door ajar to prevent an accumulation of odours.
- Page 14 – Door Reversal
- Page 15 – Door Handle Reversal:
- Page 16 – Troubleshooting; There has been a power failure
- Page 18 – “Satisfac tion guaranteed or your money back”; Hotpoint guarantee
- Page 19 – After Sales Service; Hotpoint appliance than us - the manufacturer”
- Page 20 – Indesit; Key Contacts; Repair Service and Information Help Desk; Extended Warranties; Genuine Parts and Accessories
Choose a location for your
freezer, away from any
heat sources and
allow adequate
ventilation - 100mm
(4 inches) gap above.
Level the freezer by
adjusting the front feet.
This will stop rocking or
vibration and keep the
door aligned.
If you are freezing fresh
food, turn ON fast freeze
by pressing the switch 24
hours before placing the
food inside. Place the
fresh food inside.
Remember to turn fast freeze OFF
after 24 hours.
Move the freezer into
position, using the sides
of the cabinet. Take care
to avoid damaging the
refrigerant circuit pipe
work on the rear.
Plug in and switch on.
Allow the freezer to cool
before placing food inside.
All food in the freezer
should be covered.
Read the rest of these instructions to get the best from your appliance
and remember to fill in your guarantee registration.
Keep this Book in a safe place for quick reference.
STEP 1
STEP 2
STEP 3
STEP 5
STEP 6
Before plugging in and
switching on, leave the
freezer in its final
location for at least 15
minutes to allow it to
settle.
SAFET
Y &
INST
ALL
A
TION
C
ONTR
OLS
USEFUL AD
VICE
CLEANING &
MAINTENANCE
TR
OUBLESHOO
TING
SER
VICE &
GU
AR
ANTEE
Your freezer is now
working.
If after 24 hours your
freezer is not operating
as you want, refer to the
TROUBLESHOOTING
section.
STEP 7
NB. The spanner is for illustration
only and is not supplied with the
freezer.
STEP 4
FREEZER - MODELS RZA51, RZM51, RZA61, RZM61
INSTRUCTIONS FOR INSTALLATION & USE
GETTING STARTED:
To ensure that your freezer runs reliably and efficiently follow these steps.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Hotpoint
- Model
- RZM61
- Document type
- Manual
- Language(s)
- English
- Pages
- 20
- File size
- 295 KB
- Format
Summary
For Your Safety For your safety, read the following advice: The freezer cooling system contains a small amount of gas which is environmentallyfriendly but flammable. To avoid any risk :- ● Install the freezer following the installation instructions and ensure that ventilation openings are kept clear...
Installation 3 SAFET Y & INST ALL A TION Minimum space required to open doorThe freezer needs a space of 600mm (24 inches) in front to allow the door toopen.When positioning the freezer next to a unit, a gap of 30mm (1 1 / 4 inch) can be left at the hinge side of the door to allow the easy remov...
Installation Levelling:Level the freezer when it is in its final location by adjusting the front feet, until firmcontact is made with the floor. This will stop rocking or vibration and keep the dooraligned which helps the freezer run reliably and efficiently. Note: Before plugging in and switching o...