Hotpoint SE1002X Manual - Free PDF Download

Page 2 - Operating Instructions

2 GB OVEN Contents Introduction, 3 Installation, 4 Positioning Electrical connection, 5 Data plate Description of the appliance, 6 Overall view Control panel Start-up and use, 7 Setting the clock and timer Starting the oven Control Panel Lock DEMO mode Cooking modes, 8-10 Cooking modes Programming y...

Page 3 - Introduction

GB 3 Your new electric oven is guaranteed* and will give lasting service. This guarantee is only applicable if the appliance has been installed in accordance with the installation instructions detailed in this booklet. To help make best use of your cooking equipment, please read this booklet careful...

Page 4 - Installation

4 GB ! Before placing your new appliance into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. ! Please keep these operating instructions for future reference. Pass them on to possible new o...

Page 5 - Electrical Connection

GB 5 DATA PLATE Dimensions width cm 37.5height cm 32depth cm 41.5 Volume lt. 50 Electricalconnections voltage: 230-240V ~ 50Hz /maximum power absorbed2800W-3000W ENERGY LABEL Directive 2002/40/EC on the labelof electric ovens.Standard EN 50304 Control programsin accordance withstandard IEC456 Energy...

Page 6 - Description of the appliance

6 GB Control panel GRILL rack DRIPPING PAN GUIDES for the sliding racks position 5position 4position 3position 2position 1 CURRENT PREHEATING TEMPERATURE indicator lights TURNING THE DISPLAY ON TIMER adjustment COOKING MODES SELECTION TEMPERATURE display TEMPERATURE adjustment START STOP CLOCK and C...

Page 8 - Cooking modes

8 GB Cooking modes ! All cooking modes have a default cooking temperature which may be adjusted manually between 40°C and 250°C as desired. In the BARBECUE mode, the default power level value is indicated as a percentage (%) and may also be adjusted manually. TRADITIONAL OVEN mode Both the top and b...

Page 11 - Precautions and tips

GB 11 Precautions and tips ! The appliance was designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully. General safety The appliance was designed for domestic use inside the home and is not inten...

Page 12 - Maintenance and care

12 GB Inspecting the seals Check the door seals around the oven periodically. If the seals are damaged, please contact your nearest After-sales Service Centre ( see Assistance ). We recommend not using the oven until the seals have been replaced. Replacing the light bulb To replace the oven light bu...

Page 13 - Sliding Rack Kit assembly

GB 13 To assemble the sliding racks: 1. Loosen the two screws A ( see diagram ). If the oven is fitted with self-cleaning panels, these will have to be temporarily disassembled. 2. Replace the screws A with the screws and spacers (B + C) supplied with the kit. 3. Tighten the new screws B and the cor...