Hotpoint RZA36P.1 - Manual
Hotpoint RZA36P.1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – For Your Safety; For your safety, read the following advice:; Only use this freezer for storing domestic foodstuffs.
- Page 3 – Installation; Location & Air Circulation
- Page 5 – Electrical Supply; Earth
- Page 6 – Controls; Controlling the Temperature of the Freezer Compartment
- Page 7 – Indicator Lights
- Page 8 – Useful Advice; Frozen food storage capacity; Making the best use of your Freezer; Avoid opening the door unnecessarily or for longer than needed.
- Page 9 – Storing Food in a Freezer; Ensure food is labelled and dated before placing in freezer.
- Page 11 – Defrosting; inch) Hotpoint recommend ‘fully defrosting your freezer’.; Fully defrosting your freezer.; Remove frozen food, wrap or cover and store in a cool place.
- Page 12 – Cleaning; Remove food and wrap or cover to keep it frozen.
- Page 13 – Maintenance
- Page 14 – Troubleshooting; There has been a power failure
- Page 16 – Guarantee
- Page 17 – Recycling & Disposal Information; After Sales Service
FREEZER - MODELS
RZA36G.1-RZA36P.1
INSTRUCTIONS FOR INSTALLATION & USE
GETTING STARTED:
To ensure that your freezer runs reliably and efficiently follow these steps.
Choose a location for your
freezer, away from any
heat sources and
allow adequate
ventilation - 30mm
(1
1
/
4
inch) gap above.
Level the freezer by
adjusting the front feet.
This will stop rocking or
vibration and keep the
door aligned.
Plug in and switch on.
Allow the freezer to cool
before placing food
inside.
The high temperature
light will stay on until the
freezer has cooled down.
All food in the freezer
should be covered.
Move the freezer into
position, using the sides
of the cabinet. Take care
to avoid damaging the
refrigerant circuit pipe
work on the rear.
Before plugging in and
switching on, leave the
freezer in its final
location for at least 15
minutes to allow it to
settle.
Read the rest of these instructions to get the best from your appliance
and remember to fill in your guarantee registration.
Keep this Book in a safe place for quick reference.
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
SAFET
Y &
INST
ALL
A
TION
C
ONTR
OLS
USEFUL AD
VICE
CLEANING &
MAINTENANCE
TR
OUBLESHOO
TING
SER
VICE &
GU
AR
ANTEE
Your freezer is now
working.
If after 24 hours your
freezer is not operating as
you want, refer to the
TROUBLESHOOTING
section.
STEP 6
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Hotpoint
- Model
- RZA36P.1
- Document type
- Manual
- Language(s)
- English
- Pages
- 20
- File size
- 1.6 MB
- Format
Summary
For Your Safety For your safety, read the following advice: The freezer cooling system contains a small amount of gas which is environmentallyfriendly but flammable. To avoid any risk :- ● Install the freezer following the installation instructions and ensure that ventilation openings are kept clear...
Installation Location & Air Circulation Locate your freezer away from sources of heat e.g.Cookers, Radiators, Direct Sunlight as extremetemperature will affect its performance. Allow a minimum 30mm (1 1 / 4 inch) between the top of the freezer and the underside of the worktop. Providing you foll...
Installation Electrical Supply WARNING: This appliance must be earthed. The freezer must be positioned so that the plug is accessible after installation. FusesYour appliance comes fitted with a plug and a 13A fuse. If you need to replace thefuse, only use those rated at 13A and ASTA approved to BS13...
