Honeywell TB7100A1000- Manual
Honeywell TB7100A1000– Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TB7100A1000 MULTIPROTM MULTISPEED AND MULTIPURPOSE THERMOSTAT; ORDERING INFORMATION
- Page 3 – Resistance Characteristics of Remote Sensors:
- Page 4 – MERCURY NOTICE; INSTALLATION; CAUTION; Electrical Shock or Equipment Damage Hazard.; Select Thermostat Location
- Page 5 – WIRING; Electrical Shock Hazard.; IMPORTANT; System Type
- Page 6 – Table 5. Terminal Designation Descriptions.; Conventional System Wiring; Terminal
- Page 7 – Heat Pump System Wiring
- Page 8 – Fan Coil System Wiring; Fig. 21. Typical hookup of PTAC with HI and LO fan speeds
- Page 9 – Fig. 22. Typical hookup of PTAC with HI and LO fan speeds; POWER THE THERMOSTAT; Wiring 24 Vac Common
- Page 10 – Wire Indoor Sensor; Can cause erratic system operation.; Sensor Wiring for Temperature Averaging; temperature averaging network.; SET CALENDAR AND TIME; Setting Calendar Once Functioning
- Page 11 – INSTALLER SETUP; Advanced Settings
- Page 15 – MAIN SCREEN
- Page 16 – PROGRAMMING; Fan Settings
- Page 17 – OPERATION; Operating Sequence
- Page 19 – Special Programmable Mode Functions; Override Button, Temporary Override (Duration Limit ISU; Special Non-Programmable Mode Functions; Remote Setback; Setting Temperature Overrides; HOLD TEMPERATURE UNTIL; Fan Status Displayed on Main Screen
- Page 20 – Reading Remote Indoor Temperature; ONE REMOTE INDOOR SENSOR INSTALLED; MULTIPLE REMOTE INDOOR SENSORS INSTALLED; Inside; Screen Locked; Fully Locked Screen; PARTIAL LOCKOUT 1
- Page 21 – Temperature Recovery; Minimum-Off Timer Compressor Protection; TR21 Remote Temperature Sensor; Operation
- Page 23 – Symptom
- Page 24 – Automation and Control Solutions; Perchlorate Material
PRODUCT DATA
63-2675-03
TB7100A1000 MultiPRO™
Multispeed and Multipurpose Thermostat
FOR CONVENTIONAL, HEAT PUMP, FAN COIL AND PTAC SYSTEMS
APPLICATION
The TB7100A1000 MultiPRO™ Multispeed and Multipurpose
Thermostat is an effortless, seven-day programmable or non-
programmable thermostat that provides universal system
compatibility, precise comfort control and is easy-to-program.
The TB7100 provides temperature control for gas, oil, electric,
heat pumps, PTACs, and fan coil equipment for the following
types of applications:
— 1H/1C conventional
— Up to 2H/1C heat pump
— 4 pipe fan coil (3 fan speeds)
— 2 pipe fan coil (3 fan speeds)
— 2 pipe fan coil with Auxiliary Heat (3 fan speeds)
— PTAC (Hi, Lo fan speed)
FEATURES
• Large, clear display with backlight shows the current
and set temperature and time—even in the dark.
• Menu-driven programming make setup effortless.
• Beautiful ergonomic design is smart and sophisticated
to match your customers’ lifestyle.
• Real-time clock keeps time during power failures and
automatically updates to daylight savings.
• “Saving Changes” notification lets you know when the
schedule changes have been saved.
• Change reminders let you know when to replace the
batteries.
• Holiday Override options allow you to override the
program schedule, as desired.
• Speedy same-schedule programming—no need to
copy multiple days.
• Armchair programming allows you to remove the
thermostat from the wall for programming.
• Programmable or non-programmable modes.
• Remote setback input for occupancy sensors or
timeclocks.
• VersaSpeed™ fan ramping algorithm and fan reset
algorithm (fan coil and PTAC applications).
• Up to 3 fan speeds for fan coil and 2 speeds for PTAC
applications.
• Remote indoor air sensing option (20K ohm or 10K
ohm).
Contents
Application ........................................................................
Specifications ...................................................................
Ordering Information ........................................................
Installation ........................................................................
Wiring ...............................................................................
Installer Setup .................................................................. 11
Operation .......................................................................... 17
Troubleshooting (Table 12) ............................................... 23
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Honeywell TB7100A1000
Summary
TB7100A1000 MULTIPRO™ MULTISPEED AND MULTIPURPOSE THERMOSTAT 63-2675—03 2 ORDERING INFORMATION When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the TRADELINE® Catalog or price sheets for complete ordering number. If you have additional q...
TB7100A1000 MULTIPRO™ MULTISPEED AND MULTIPURPOSE THERMOSTAT 3 63-2675—03 NOTE: Alkaline batteries keep calendar and time if lithium battery is no longer functional. Resistance Characteristics of Remote Sensors: C7189U Remote Indoor Sensor: 10K ohm NTC. C7772 Flush-Mount Remote Indoor Sensor: 20K oh...
TB7100A1000 MULTIPRO™ MULTISPEED AND MULTIPURPOSE THERMOSTAT 63-2675—03 4 Fig. 4. C7189U Indoor Sensor dimensions in in. (mm). MERCURY NOTICE If this control is replacing a control that contains mercury in a sealed tube, do not place your old control in the trash. Dispose of properly. Contact your l...
