Honeywell S9360A- Manual
Honeywell S9360A– Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – PLANNING THE INSTALLATION; INSTALLATION AND CHECKOUT
- Page 4 – Perform Preinstallation Safety Inspection; WARNING; Mount Module
- Page 5 – Wire the System
- Page 6 – S937XA Hot Surface Ignition Versions
- Page 8 – Common Connectors
- Page 9 – HSI Model Specific Connectors
- Page 11 – Display; CHECKOUT; Remote Display; WIRING
- Page 12 – Mounting Sensor and Thermowell; Immersion Well Fitting; CAUTION; Wiring; OPERATION AND CHECKOUT; Operation
- Page 14 – TROUBLESHOOTING; Intermittent Pilot; Ignition System Checks; Troubleshooting Error Codes
INSTALLATION INSTRUCTIONS
69-2076-01
S9360A, S9361A, S9370A, S9371A
Integrated Boiler Controllers
APPLICATION
These integrated boiler control modules provide ignition
sequence, flame monitoring and safety shutoff for either
intermittent pilot spark ignition or direct hot surface
ignition heating systems. They also provide limit rated
water temperature control and display interface capability
for either “on-board” or remote user interface
applications.
• S9360A—Spark Ignition, Intermittent Pilot, Remote
Display.
• S9361A—Spark Ignition, Intermittent Pilot, “On board”
Display.
• S9370A—Hot Surface Ignition, Remote Display.
• S9371A—Hot Surface Ignition, “On board” Display.
• Enabled with EnviraCOM™ communication capability
to support remote monitoring and diagnostics.
• Limit-rated Temperature Sensing Probe.
• One or Two Sensor Models.
SPECIFICATIONS
IMPORTANT:
The specifications given in this publication do
not include normal manufacturing tolerances.
Therefore, an individual unit may not match the
listed specifications exactly. Also, this product is
tested and calibrated under closely controlled
conditions, and some minor differences in
performance can be expected if those
conditions are changed.
Model Numbers
Dimensions:
See Fig. 1.
S
—Switching Control
9
3
—Integrated Hydronic Control Platform
6
—Spark Ignition
7
—Hot Surface Ignition
0
—Remote Display Required
1
—Integrated On-Board Display
A
—Boiler Control
B
—Water Heater Control
C
—Pool Heater Control
1
—No Circulator
2
—On/Off Circulator
S 9
3
6
0
A 1
000
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Honeywell S9360A
Summary
S9360A, S9361A, S9370A, S9371A INTEGRATED BOILER CONTROLLERS 3 69-2076—01 Table 1. Recommended Ignition Cables. Transformer Requirement: Add current ratings of module, pilot valve, main valve, vent damper and any other components of the control system to determine transformer size requirement. Appro...
S9360A, S9361A, S9370A, S9371A INTEGRATED BOILER CONTROLLERS 69-2076—01 4 WARNING Fire or Explosion Hazard.Can cause severe injury, death or property damage. 1. The module can malfunction if it gets wet, leading to accumulation of explosive gas.• Never install where water can flood, drip or condense...
S9360A, S9361A, S9370A, S9371A INTEGRATED BOILER CONTROLLERS 5 69-2076—01 Fig. 3. Align module with slots in control box. Wire the System WARNING Electrical Shock Hazard.Can cause severe injury, death or property damage. Disconnect the power supply before making wiring connections to prevent electri...
