Honeywell IAQ - Manual
Honeywell IAQ – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installation Guide; Setup function; Installer setup; SYSTEM
- Page 3 – VisionPRO® IAQ
- Page 6 – Special function
- Page 7 – Installer system test; TEST; System test System status; Err
- Page 8 – Accessories; Please contact your distributor to order replacement parts.; Error codes
- Page 9 – Guide; REMARQUE À PROPOS DU MERCURE :; Installation
- Page 10 – Fonctions; Configuration
- Page 14 – Fonctions spéciales
- Page 15 – Essai de; Essai du système; MORE
- Page 16 – Accessoires
- Page 17 – Guía de; Debe instalarlo un técnico capacitado y con experiencia.; Instalación
- Page 18 – Función; Configuración
- Page 22 – Funciones especiales
- Page 23 – Prueba; Prueba del sistema; Códigos de error; Cómo usar la Prueba del sistema
- Page 24 – Automation and Control Solutions; Accesorios
VisionPRO® IAQ
Touch-screen Programmable Thermostat
® U.S. Registered Trademark. US Patent No. 6,208,263;
6,373,376; 6,448,901; 6,595,430; 7,012,927; 7,044,397; D509151
and other patents pending. Copyright © 2008 Honeywell
International Inc. All rights reserved.
Installation
Guide
69-1816EFS-03
For up to 4 Heat/2 Cool systems with Honeywell THM5421C or equivalent.
CAUTION: ELECTRICAL HAZARD.
Can cause electrical shock or equipment damage.
Disconnect power before beginning installation.
MERCURY NOTICE:
If this product is replacing a control that contains mercury in a
sealed tube, do not place the old control in the trash. Contact your local waste manage-
ment authority for instructions regarding recycling and proper disposal.
Must be installed by a trained, experienced technician.
Read these instructions
carefully. Failure to follow these instructions can damage the product or cause a
hazardous condition.
Installation
Thermostat can be mounted on 2" x 4" J box or on drywall or plaster using included wall
anchors (drill 3/16" holes for drywall; 7/32" holes for plaster).
Connect 1, 2, 3 terminals on thermostat to 1, 2, 3 terminals on EIM or Zone Panel; see EIM or
Zone Panel Installation Guide for wiring diagrams.
Set date/time
Date
Month
Year
Press
DONE
to save changes
DONE
TUE
15
6
2006
Time
Press
DONE
to exit
DONE
TUE
6
PM
1:00
This thermostat contains a Lithium battery which may contain Perchlorate material.
Perchlorate Material—special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perchlorate
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Installation Guide 69-1816EFS—03 Installer setup Setup function Settings & options (factory default in bold) 0110 Zone number 0 Not zoned 1–9 Zone number 0120 Year (first two digits) 20 ( 20 00- 20 99) 21 (21 00- 21 78) 0130 Year (second two digits) 06 (20 06 ) [Other options: 00-99] 0140 Month ...
VisionPRO® IAQ 3 69-1816EFS—03 0210 External fossil fuel kit 1 External fossil fuel kit controls backup heat 0 Thermostat controls backup heat (outdoor sensor required) 0220 Stage 1 compressor 1cycle rate E Auto Discover ** [Other options: 1 to CPH] 0230 Stage 2 compressor cycle rate E Auto Discover...
Installation Guide 69-1816EFS—03 6 Special function Auto Discover: Setup functions set to “E” (Auto Discover) will be configured automatically, based on information sent from connected equipment. When using Auto Discover, verify that the discovered value is correct. If it is not, the equipment is no...
