Hobart 2212 - Manual
Hobart 2212 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – The model 2212 slicer is equipped with a
- Page 3 – INSTALLATION; THIS MACHINE IS PROVIDED WITH A THREE-PRONG GROUNDING PLUG.
- Page 4 – OPERATION; SAFETY
- Page 6 – NOTE
- Page 7 – MAINTENANCE; KNIFE SHARPENING
MODEL 2212 SLICER
MODEL
2212 ML-136132
701 S. RIDGE AVENUE
TROY, OHIO 45374-0001
937 332-3000
www.hobartcorp.com
FORM 35215 (Apr. 2006)
2212 Slcier
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
– 2 – Installation, Operation, and Care of MODEL 2212 Slicer SAVE THESE INSTRUCTIONS GENERAL The model 2212 slicer is equipped with a 1 ⁄ 2 HP motor and is available for single-phase electrical service. The slicer is furnished with a cord and plug as standard equipment. The low carriage fence is an ...
– 3 – INSTALLATION UNPACKING Immediately after unpacking the slicer, check for possible shipping damage. If the slicer is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.Prior to installing the slicer, test the electrical service to assure it agree...
– 4 – OPERATION SAFETY SAFETY DEVICES INCORPORATED IN THIS SLICER MUST BE IN THEIR CORRECT OPERATING POSITIONS ANYTIME THE SLICER IS IN USE.The T OP K NIFE C OVER must be in position and secured with the L ATCH K NOB (Fig. 2). The R ING G UARD is not removable.The M EAT G RIP (Fig. 2) must be used w...
