Hobart 2212 - Manuals

– 2 – Installation, Operation, and Care of MODEL 2212 Slicer SAVE THESE INSTRUCTIONS GENERAL The model 2212 slicer is equipped with a 1 ⁄ 2 HP motor and is available for single-phase electrical service. The slicer is furnished with a cord and plug as standard equipment. The low carriage fence is an ...

– 3 – INSTALLATION UNPACKING Immediately after unpacking the slicer, check for possible shipping damage. If the slicer is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.Prior to installing the slicer, test the electrical service to assure it agree...

– 4 – OPERATION SAFETY SAFETY DEVICES INCORPORATED IN THIS SLICER MUST BE IN THEIR CORRECT OPERATING POSITIONS ANYTIME THE SLICER IS IN USE.The T OP K NIFE C OVER must be in position and secured with the L ATCH K NOB (Fig. 2). The R ING G UARD is not removable.The M EAT G RIP (Fig. 2) must be used w...