Page 2 - Introduction; Please always observe for the sake of safety.
- 2 - Introduction Thank you for your purchase of this product. This user's manual contains items that you should follow in order to prevent any harm to yourself and others, or damage to equipment, and to enable you to use this product safely. An explanation of the markings and symbols used in this ...
Page 5 - Safety precautions; The phone
- 5 - Safety precautions Be sure to read this section for the sake of safe usage. Please observe these precautions in order to use this product safely and prevent injury to the user and others and to prevent damage to equipment. Please understand these "warnings" and "cautions" befor...
Page 10 - CONTENTS; Chapter 1
- 10 - CONTENTS Introduction...............................................................................................................................................................................2 Safety precautions................................................................................
Page 12 - Overview
Page 13 - Features of the WirelessIP
- 1-2 - Chapter 1 Overview Features of the WirelessIP ■ Overview of this product ● This is a mobile wireless IP telephone conforming with [IEEE802.11b] standard for wireless LAN (wi-fi). ● This product supports WEP (64/128/256 bit) and WPA-PSK (TKIP) encryption formats. ● Up to 300 contacts can be r...
Page 14 - Please check the; Please recycle after use.
- 1-3 - Chapter 1 Please check the This product package contains the following items. Please verify that you have all these items before using this product. If any item in the set is missing or there is a mistake or omission in the user's manual, please contact the store of purchase. WirelessIP 3000...
Page 15 - Names & Functions of Device Parts
- 1-4 - Chapter 1 Overview Names & Functions of Device Parts ■ Explanations of the parts No. Name Functions 1 USB Connector Connection of USB Cable 2 LeftSoft Key Used for sub-menu operation etc. 3 RightSoft Key Used for sub-menu operation etc. 4 Enter Key Choice / decision button 5 Multi-Functi...
Page 18 - Using accessories; Accessories; Battery pack installation method
- 1-7 - Chapter 1 Overview Using accessories These guidelines cover the accessories for this product. Accessories ■ Battery pack ■ AC power supply adaptor ■ Charger Battery pack installation method While pressing the rear cover in direction (1), slide the rear cover in direction (2) and remove it. W...
Page 19 - Battery pack removal; AC power supply adaptor
- 1-8 - Chapter 1 Overview Using accessories Chapter 1 Overview Using accessories Battery pack removal While pressing the rear cover in direction (1), slide the rear cover in direction (2) and remove it. Remove the battery pack. AC power supply adaptor This product can be charged with the AC adaptor...
Page 20 - Charging method
- 1-9 - Chapter 1 Overview Using accessories Using accessories Charging method ● Plug the AC power supply adaptor into a socket and connect it to the charger. ● Insert the phone into the top of the charger until the LED lights up blue. (The LED goes out when the charging is complete)
Page 22 - Chapter 2; Switching the Power On/Off; Power ON
- 2-2 - Chapter 2 Placing and Receiving Calls Switching the Power On/Off Power ON Switching on the power for this product Power OFF Switching off the power for this product 1 With the power Off, if you hold down the key for at least 3 seconds, a screen like that in the figure on the right is display...
Page 23 - Calling method
- 2-3 - Chapter 2 Placing and Receiving Calls Calling method Inputting the telephone number and making a call 1 When making a call, check that the internal line number is displayed on the display If "Not connected" or "Not registered" is displayed, this phone can not be used. 2 Enter...
Page 24 - Receiving calls
- 2-4 - Chapter 2 Placing and Receiving Calls Receiving calls Receiving an incoming call 1 Check that the internal number is displayed on the display If "Not connected" or "Not registered" is displayed, this phone cannot be used. 2 When a call comes in, the other party's telephone nu...
Page 25 - Call log
- 2-5 - Chapter 2 Placing and Receiving Calls Call log Displays the Dialed call log and the Received call log. 1 While on standby, press the key to select the menu. Select "3. Call log" using the keys of the key, then press the key. In Standby the Key’s key displays the "Received call lo...
Page 26 - Details
- 2-6 - Chapter 2 Placing and Receiving Calls Call log 3 To display the Dialed call log, Select "2. Dialed call log", using the keys of the key, then press the key. The name or telephone number called is displayed in the same way as for the Received call log. The meanings of the icons displa...
Page 27 - Deleting one item from the call log
- 2-7 - Chapter 2 Placing and Receiving Calls Call log Deleting one item from the call log Deleting one call from a call log. 1 Display a call log (Received call log or Dialed call log). Select the call you want to delete (from the received call log or dialed call log), then press the key to display...
Page 28 - Deleting the entire call log
- 2-8 - Chapter 2 Placing and Receiving Calls Call log Deleting the entire call log Deleting entire call logs. 1 From the call log menu, Select "3. Delete all", using the keys of the key, then confirm with the key. 2 A confirmation message is displayed. Select "Yes" using the keys of...
Page 29 - Various operation methods; Redial
- 2-9 - Chapter 2 Placing and Receiving Chapter 2 Placing and Receiving Calls Various operation methods Redial The last telephone number dialed is redialed. 1 In Standby, hold down the key or the # key for at least 3 seconds. 2 The last telephone number dialed is redialed. * The actual operation may...
Page 30 - Call from phone book
- 2-10 - Chapter 3 How to Use the Telephone Chapter 2 Placing and Receiving Calls Various operation methods Call from phone book Making a call from the phone book. 1 In Standby, the phone book search screen is displayed with the key of the key. 2 The following five methods can be used for finding a ...
Page 32 - Caller ID
- 2-12 - Chapter 2 Placing and Receiving Calls Various operation methods Caller ID These commands configure settings for caller ID. 1 In Standby, Press the key to select the menu. Select "5. Setup" using the keys of the key, then confirm with the key. 2 From the settings menu, Select "7....
Page 33 - Speed Dialing
- 2-13 - Chapter 2 Placing and Receiving Calls Various operation methods Speed Dialing Making a call with a speed dialing number. 1 Input a speed dialing number registered in the phone book. Speed dialing numbers 0-299 can be registered. 2 Press the last digit in the speed dialing number and hold it...
Page 34 - Hold function; Hold; Ending a hold
- 2-14 - Chapter 2 Placing and Receiving Calls Various operation methods Hold function This is used to put a call on hold. The hold tones are played for the other party who is on hold. ■ Hold Pressing the key during a call puts the call on hold. The hold tone is played for the other party on hold. ■...
Page 35 - Call waiting
- 2-15 - Chapter 2 Placing and Receiving Calls Various operation methods Call waiting If you are on one call and another call comes in, you can put the first call on hold and answer the new incoming call. If you are on one call and another call comes in, the incoming terminal plays the incoming call...
Page 36 - Hold transfer
- 2-16 - Chapter 2 Placing and Receiving Calls Various operation methods Hold transfer You can transfer a call to another internal line. Calls can only be transferred external line -> internal or internal -> internal. Press the key to put your current call on hold. During a call Phone you want...
Page 40 - Chapter 3; Phone Book; Phone book menu
- 3-2 - Chapter 3 Phone Book Phone book menu Registering, editing, and deleting contacts in the phone book 1 In Standby, press the key to select the menu. Select "1. Phone book". using the keys of the key, then press the key.
Page 41 - Phone book; Phone book registration; Registration from phone book menu
- 3-3 - Chapter 3 Phone book Phone book registration Registration from phone book menu Registering information into the phone book from the new registration menu 1 From the phone book menu, select "2. New number" using the keys of the key, then press the key. 2 Please enter your information....
Page 43 - Registration from a telephone number
- 3-5 - Chapter 3 Phone book Phone book registration Registration from a telephone number Inputting a telephone number to register it into the phone book 1 During standby, enter the telephone number, and press the key to display the sub-menu. Select "2. Save". 2 Please enter your information...
Page 45 - Registration from a call log
- 3-7 - Chapter 3 How to Use the Telephone Chapter 3 Phone book Phone book registration Registration from a call log Registering details into the phone book from the call log. 1 Display the call log. Select the number to register, press the key to display the sub-menu. Select "1. Save". 2 In...
Page 47 - Phone book editing
- 3-9 - Chapter 3 How to Use the Telephone Chapter 3 Phone book Phone book editing Editing the phone book from search results 1 Search for the registration information you want to edit. Select the number you want to edit, press the key to display the sub-menu. Select "2. Edit". 2 Input the i...
Page 49 - Group management
- 3-11 - Browse Chapter 3 Phone book Group management Editing a phone book group name. 1 Select "3. Edit group" using the keys of the key, then press the key. 2 To add a group, press the key to display the sub-menu. Select “1. Add". 3 Input the group name, and save with the key. 4 To edi...
Page 51 - Deleting one item from phone book
- 3-13 - Chapter 3 How to Use the Telephone Chapter 3 Phone book Deleting one item from phone book Deleting one data item from the phone book. 1 Select "1. Search" using the keys of the key, then press the key. 2 Search for the telephone number you want to delete. After selecting the telepho...
Page 53 - Deleting entire phone book
- 3-15 - Chapter 3 How to Use the Telephone Chapter 3 Contact list Deleting entire phone book Deleting all the data in the phone book. 1 Select "4. Delete all" using the keys of the key, then press the key. 2 A confirmation message is displayed. Select "Yes" using the keys of the key...
Page 55 - Message menu
- 4-2 - Chapter 3 How to Use the Telephone Chapter 4 Messaging Message menu Displaying the Message menu 1 In Standby, press the key to select the menu. Select "2. Message" using the keys of the key, then press the key. With some connection equipment, this is not possible.
Page 56 - Messaging; Inbox
- 4-3 - Chapter 3 How to Use the Telephone Chapter 4 Messaging Inbox Displays, edits, and deletes received messages. 1 The message icon is displayed on the standby screen when there is an unread message. To display the message, from the IM menu, Select "1. Recv. box" using the keys of the ke...
Page 60 - New Message
- 4-7 - Chapter 3 How to Use the Telephone Chapter 4 Messaging New Message Writing and sending a new message. 1 from the Message menu, Select "2. Write Msg.", using the keys of the key, then press the key. 2 Input the message with the number pad. Finally, confirm with the key. Input the tele...
Page 61 - Drafts
- 4-8 - Chapter 3 How to Use the Telephone Chapter 4 Messaging Drafts An unsent message is stored temporarily. 1 If you are not sending the message right away, then press the key when creating the message to save it for later use. Select "Yes" using the keys of the key, then press the key. T...
Page 64 - Outbox
- 4-11 - Chapter 3 How to Use the Telephone Chapter 4 Messaging Outbox Displaying, editing, deleting, and re-sending of sent messages 1 from the Message menu, Select "4. Sent box" using the keys of the key, then press the key 2 A list of the messages sent in the past is displayed. Use the ke...
Page 67 - Setup
- 4-14 - Chapter 3 How to Use the Telephone Chapter 4 Messaging Setup Configure the ring tone and mode when a message arrives. 1 from the Message menu, Select "5. Setup", using the keys of the key, then press the key. 2 Displays configuration information. Using the key, select “Edit.” There ...
Page 69 - Presence menu
- 5-2 - Chapter 3 How to Use the Telephone Chapter 5 Presence Presence menu Displays the presence menu. 1 In Standby, press the key to select the menu. Select "4. Presence" using the keys of the key, then press the key. With some connection equipment, this is not possible.
Page 70 - User list
- 5-3 - Chapter 3 How to Use the Telephone Chapter 5 Presence User list Displaying a list of registered users 1 From the presence menu, Select "1. User list” using the keys of the key, then press the key. 2 A list of registered users is displayed. 3 To register a user, on the user list screen, p...
Page 74 - Block list
- 5-7 - Chapter 3 How to Use the Telephone Chapter 5 Presence Block list Displaying a list of users registered in the block list. Your status is not disclosed to users registered in the block list. 1 From the presence menu, Select "2. Block list" using the keys of the key, then press the key...
Page 79 - Setting
- 5-12 - Chapter 3 How to Use the Telephone Chapter 5 Presence Setting Displays the setting menu. 1 From the presence menu, Select "4. Setup" using the keys of the key, then press the key. 2 Displays configuration information. ・ Online bell ・ Ring Type ・ Mode To change a setting, press the k...
Page 81 - Chapter 6
- 6-2 - Chapter 6 Other settings Manner mode On/Off When Manner mode is set, the ringer does not ring and all ringers go into vibration mode. 1 With the phone on standby, hold down the “ * “ key on the number pad for at least 1 second. The phone goes into Manner mode. 2 When the phone goes into Mann...
Page 82 - Setting/Ending keylock
- 6-3 - Chapter 3 How to Use the Telephone Chapter 6 Other settings Setting/Ending keylock When the keylock is set, button operations are disabled. You can lock the keys to prevent accidental operation of keys, for example when you walk around with the phone's power On. 1 In Standby, hold down the #...
Page 84 - Other settings; Settings menu
- 6-5 - Chapter 6 Other settings Settings menu Displays the setting menu. 1 In Standby, press the key to select the menu. Select "5. Setup" using the keys of the key, then press the key. 2 Displays the setup menu.
Page 85 - Password/lock mode selection
- 6-6 - Chapter 6 Other settings Password/lock mode selection Changing the keylock password and configuring settings for keylock operations. You can prevent unauthorized access by a third party by using a password to disable button operations on this product. 1 To change the keylock password, from t...
Page 88 - Alarm
- 6-9 - Chapter 6 Other settings Alarm Setting the alarm function 1 To change the alarm function settings, from the setting menu, Select "3. Alarm" using the keys of the key, then press the key. 2 Up to 3 alarm settings can be registered.. Select "1. Alarm 1", "2. Alarm 2", o...
Page 89 - Volume adjustment
- 6-10 - Chapter 6 Other settings Volume adjustment Adjusting the ringer volume, handset volume, and button confirmation beep volume 1 From the settings menu, Select "4. Volume" using the keys of the key, then press the key. 2 Displays configuration information. ・ Ring Vol ・ Handset Vol ・ No...
Page 90 - Error Notification; Service LED
- 6-11 - Chapter 6 Other settings Error Notification Setting the Error notification 1 From the settings menu, Select "5. Error notify" using the keys of the key, then press the key. Service LED Setting the Service LED 1 From the Error notify menu, Select "1. Service LED", using the k...
Page 91 - Error message
- 6-12 - Chapter 6 Other settings Error Notification Error message Setting the error messages 1 From the Error notify menu, Select "2. Error Msg.", using the keys of the key, then press the key. Select "On" or "Off" using the keys of the key, then confirm with the key. Error ...
Page 92 - Log Display
- 6-13 - Chapter 6 Other settings Log Display 5 To delete an error message select “edit” using the key, Select "1. Delete all" then press the key. KeySelect “Yes” using the keys of the key, then press the key. All error messages are deleted.
Page 93 - Information display
- 6-14 - Chapter 6 Other settings Information display Information on the network can be checked. 1 From the settings menu, Select "6. Information" using the keys of the key, then confirm with the key. TCP/IP You can check the TCP/IP contents. 1 From the information display menu, select "...
Page 94 - Wireless networking
- 6-15 - Chapter 6 Other settings Information display Wireless networking You can check the wireless contents. 1 Select "2. Wireless LAN" using the keys of the key, then confirm with the key. The information below is displayed. With the keys, scroll and confirm. • CurrentNetwork • SSID • Sig...
Page 95 - MAC address value
- 6-16 - Chapter 6 Other settings Information display MAC address value You can check the contents of the MAC address. 1 Select "4. MAC address" using the keys of the key, then confirm with the key. The MAC address for this product is displayed. Web server You can check the Web server conten...
Page 96 - Version
- 6-17 - Chapter 6 Other settings Information display Version You can check the version. 1 Select "6. Version" using the keys of the key, then confirm with the key. The following information is displayed. • Software version. • Boot ROM version
Page 97 - Equipment settings; Time
- 6-18 - Chapter 6 Other settings Equipment settings Perform settings for this product 1 From the settings menu, Select "7. Advanced" using the keys of the key, then press the key. Time Set the clock 1 From the equipment settings menu, Select "1. Clock" using the keys of the key, the...
Page 100 - Contrast
- 6-21 - Chapter 6 Other settings Equipment settings Contrast Setting the display contrast 1 From the equipment settings menu, Select "2. Contrast" using the keys of the key, then press the key. 2 Adjust the contrast using the keys of the key, then confirm with the key. Font size Setting the...
Page 101 - Language setting
- 6-22 - Chapter 6 Other settings Equipment settings Language setting Settings for the language display 1 From the equipment settings menu, Select "4. Language setting" using the keys of the key, then confirm with the key. 2 Select "Japanese" or "English" using the keys of th...
Page 102 - Deleting user data
- 6-23 - Chapter 6 Other settings Equipment settings Deleting user data This deletes all the user data (contact list, outgoing call log, and incoming call log). 1 From the equipment settings menu, Select "6. User data reset” using the keys of the key, then press the key. 2 A confirmation message...
Page 104 - Chapter 7; Maintenance; Maintenance menu
- 7-2 - Chapter 7 Maintenance Maintenance menu You can check the network settings. 1 On Standby, press the key to select the menu. Select "6. Network", using the keys of the key, then confirm with the key.
Page 105 - Network search
- 7-3 - Chapter 7 Maintenance Network search Information on signals detected can be displayed. 1 From the maintenance menu, Select "1. Network search", using the keys of the key, then confirm with the key. 2 A message is displayed during the search. The SSID of the detected access points are...
Page 107 - Ping; Manual
- 7-5 - Chapter 7 Maintenance Ping A ping can be sent for any IP address. 1 From the maintenance menu, Select “2. Ping test” using the keys of the key, then press the key. ■ Manual 1 From the Ping test menu select “1. Manual” using the keys of the key, Then confirm with the key. 2 Enter the IP addre...
Page 108 - st Proxy Server; nd Proxy Server
- 7-6 - Chapter 7 Maintenance Ping 1st Proxy Server 1 From the Ping test menu Select the “1st Proxy” server using the keys of the key, Then confirm with the key. 2 Execute a ping to the 1st proxy server. recv: Displays the ping response. The following numbers indicate the response time (sec). time o...
Page 109 - Default Gateway; TFTP Server
- 7-7 - Chapter 7 Maintenance Ping 3 If the 2nd Proxy server is not configured, the message as shown in the diagram on the right is displayed. Default Gateway 1 From the Ping test menu Select “4. Gateway” using the keys of the key, then confirm with the key. 2 Execute a ping to the default gateway. ...
Page 110 - Network connections
- 7-8 - Chapter 7 Maintenance Network connections Network reload. 1 From the maintenance menu, Select “3. Network reload” using the keys of the key, then confirm with the key. 2 Select “Restart” or “Deactivate” using the keys of the key, then confirm with the key. 3 In Standby, press the key of the ...
Page 112 - Chapter 8; Web settings; WirelessIP 3000 web settings; When setting via TELNET:
- 8-2 - Chapter 8 Web settings WirelessIP 3000 web settings Overview The WirelessIP 3000 is able to be configured via the Internet. The WirelessIP 3000 Web settings can configure detailed settings that cannot be configured from the device itself. The Web server for this device needs to be configured...
Page 113 - General User Menu; Main
- 8-3 - Chapter 8 Web settings General User Menu Only browsing of basic information, editing the phonebook, and editing of the user password are permitted. Main The basic information regarding the phone such as its software version and TCP/IP settings is displayed. [Display Items] • Model: displays ...
Page 114 - Phonebook Menu List
- 8-4 - Chapter 8 Web settings General User Menu Phone book Searches/configures/deletes the phone book data in the WirelessIP3000. ■ Phonebook Menu List Search by Index: Searches/edits/deletes by speed dial number. Name Search: Searches/edits/deletes by name. Phone Number Search: Searches/edits/dele...
Page 122 - Changing the Password
- 8-12 - Chapter 8 Web settings General User Menu Changing the Password Changes the user password for the WirelessIP 3000. Enter the username (user) in the ID field. Enter the old password. Enter the new password. Re-enter the new password (for confirmation). Click the “CHANGE VALUE” button. * Click...
Page 124 - Chapter 9; Appendix; Troubleshooting
- 9-2 - Chapter 9 Appendix Troubleshooting Phenomena Response Does not start. The battery pack may be dead. If the battery pack is dead, the device will not start and the LED will not light up. Restart it again after recharging the battery using the AC adapter. Cannot operate the keys and the displa...
Page 125 - Text input mode; Number pad equivalence table
- 9-3 - Chapter 9 Appendix Text input mode Number pad equivalence table ■ Number Input Mode ■ Character Input Mode (similar to lower case) Key Character assignments Key Character assignments 1 1 1 ． (dot) @ 2 2 2 A B C 3 3 3 D E F 4 4 4 G H I 5 5 5 J K L 6 6 6 M N O 7 7 7 P Q R S 8 8 8 T U V 9 9 9 W...
Page 126 - Character input method
- 9-4 - Chapter 9 Appendix Text input mode Character input method 1 On the input screen, use the key to switch the input mode (hiragana, katakana, upper case/ lower case/ symbols/ numbers). The mode switching depends on the item being input. 2 When selecting a symbol, select the type of symbol by us...
Page 128 - Menu screens
- 9-6 - Chapter 9 Appendix Menu screens Explanation of the Menu screen. 1 Menu numbers can be directly entered on the menu screen to move to a function, in addition to using the key. For example, when the 5 key is pressed on the screen in the right diagram, it moves to the Setup Menu. And when the k...
Page 130 - Glossary
- 9-8 - Chapter 9 Appendix Glossary LAN （ Local Area Network ） Abbreviation for Local Area Network. Refers to a small scale computer network. Beacon This is a data packet periodically sent by the access point to simplify the connection with the wireless LAN client device. Power save mode There are t...
Page 131 - INDEX
- 9-9 - Chapter 9 Appendix INDEX B Beacon Interval.............................................................................. 7-3 Button Confirmation Volume............................................... 6-10, 6-11 C Call...................................2-3, 2-9, 2-10, 2-12, 2-13, 2-14, 2-15, 2...
