Heat Controller RADS-51B - Manual
Heat Controller RADS-51B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – CONTENTS; DISASSEMBLY INSTRUCTIONS
- Page 5 – MECHANICAL PARTS; Figure 1
- Page 6 – AIR HANDLING PARTS; Figure 6
- Page 9 – Remove a screw securing the clip with cord to the; REFRIGERANT CYCLE
- Page 10 – NOTES
- Page 11 – Figure 21A-Pulling Vacuum
- Page 12 – SELECT THE BEST LOCATION; NOTE: All supporting parts should be secured to firm
- Page 13 – Installation; Insert the guide panels into the guides of the air condi-; LOCATING UNIT IN WINDOW; b. The bracket helps to hold unit securely in place. Be; CAUTION
- Page 15 – REMOVAL FROM WINDOW; TROUBLESHOOTING GUIDE
- Page 17 – TROUBLESHOOTING GUIDE; Unit is running but cooling is ineffective.; Ineffective Cooling
- Page 18 – Fails to Start
- Page 22 – PER SET
- Page 25 – 828A26005D
5RRP$LU&RQGLWLRQHU
+($7&21752//(5,1&
02'(/6
RADS-51B
6HUYLFH$QG3DUWV0DQXDO
CAUTION
PRECAUTIONS IN THIS MANUAL.
• ONLY FOR AUTHORIZED SERVICE PERSONNEL
.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
—2— CONTENTS 1. PREFACE ...................................................................................................................................................3 1.1 FEATURES......................................................................................................................
—5— 2. DISASSEMBLY INSTRUCTIONS 2.1 MECHANICAL PARTS 2.1.1 FRONT GRILLE 1. Pull the inlet grille forward. 2. Remove the screw securing the Front Grille. (Fig. 3) 3. Push the grille up from the bottom and pull the top of the grille away from the case to lift the top tabs out of their slots. (Fig. 4) ...
—6— 2.2 AIR HANDLING PARTS 2.2.1 AIR GUIDE UPPER 1. Disconnect the unit from the power source.2. Remove the front grille. (Refer to Section 2.1.1)3. Remove the cabinet. (Refer to Section 2.1.2)4. Remove the control board. (Refer to Section 2.1.3) 5. Remove 2 screws that secure the air guide upper to...