HealthRider HRSY23080 - Manual
HealthRider HRSY23080 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Before You Begin
- Page 4 – Assembly
- Page 5 – Frame Assembly
- Page 9 – Arm Assembly
- Page 10 – Cable Assembly
- Page 16 – Seat Assembly
- Page 17 – Miscellaneous Assembly
- Page 19 – Cable Diagram
- Page 20 – Adjustment; Changing the Weight Setting
- Page 22 – Adjusting the Butterfly Arms; Weight Resistance Chart
- Page 23 – Tightening the Cables; Trouble-shooting and Maintenance
- Page 25 – Part Identification Chart - Model No. HRSY23080
- Page 27 – Part List - Model No. HRSY23080
¨
USERÕS MANUAL
Model No. HRSY23080
Serial No.
The serial number is found in the
location shown below. Write the
serial number in the space above.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manu-
al for future reference.
Serial
Number
Decal
PATENT PENDING
QUESTIONS?
As a manufacturer, we are
committed to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts, we
will guarantee complete satisfac-
tion through direct assistance
from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer hot line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.ÐFri., 6 a.m.Ð6 p.m. MST
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 ASSEMBLED DIMENSIONS: Height: 81 in.Width: 54 in. Length: 67 in. Low PulleyStation Foot Plate LegLever Butterfly Arm Press Arms ShroudCovering Weight Stack Press ArmAdjustmentCam Seat Backrest Thank you for selecting the innovative and versatileHEALTHRIDER ¨ 230 Home Gym System. The HEALTHRIDER ¨ ...
4 Note: This introduction will save you moretime than it takes to read it! Identifying Parts To help you identify the small parts used in assem-bly, we have included a PART IDENTIFICATIONCHART located in the center of this manual. Placethe chart on the floor or work table and use it toquickly identi...
1. Before beginning, make sure that you have readand understood the information on page 4. Locate and open the parts bag labeled ÒFRAMEASSEMBLY.Ó Insert four 3/8Ó x 2 3/4Ó Carriage Bolts (45) upthrough the indicated holes in the Stabilizer (4). Inserta 3/8Ó x 3 1/2Ó Carriage Bolt (62) up through the...