Page 2 - CONTENTS
3 2 CONTENTS Contents 2 Introduction 3 Specifications / Main Features 4 Safety Precautions 5 - 6 - Safety Alert Symbol 5 - Training 5 - Preparation 5 - Safety Symbols 5 - Operation 5 - 6 - Maintenance & Storage 6 - Control Symbols 6 Assembling the Mower Before First Use 7 - Delivery Checklist 7 ...
Page 3 - INTRODUCTION
3 INTRODUCTION Thank you for purchasing a Hayter mower. The following pages are designed to help you gain safe and efficient service from your machine. IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it gives essential information regarding mower safety, operation, maint...
Page 4 - SPECIFICATIONS / MAIN FEATURES
5 4 SPECIFICATIONS / MAIN FEATURES 1 2 3 4 5 6 7 8 9 11 10 18 12 13 14 15 16 17 19 Code 490 491 Engine Briggs & Stratton Briggs & Stratton Engine type Series 650 Series 650 Engine / Cutterbar Speed 2750 rpm 2750 rpm Fuel type Unleaded petrol Unleaded petrol Fuel capacity 1 litre 1 litre Oil ...
Page 5 - SAFETY PRECAUTIONS; Safety Alert Symbol
5 SAFETY PRECAUTIONS Safety Alert Symbol This safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury. Carefully read the following and inform others. Your mower is perfectly safe if used correctly. Failure to observe the following prec...
Page 6 - Operation; Maintenance & Storage; Control Symbols
7 6 SAFETY PRECAUTIONS Operation cont If the machine has to be tilted for transportation when crossing surfaces other than grass, and when transporting the machine to and from the area to be mowed. Stop the blade (s) by releasing the engine stop lever, ensure that the blade (s) have stopped before t...
Page 7 - ASSEMBLING THE MOWER BEFORE FIRST USE
7 Delivery Checklist Remove the mower from the packaging and check that the following items have been supplied correctly. If any items are missing contact, your local Hayter dealer. 1. Engine Handbook. 3. Charger (491) 2. Grassbag. 4. Ignition Key (491) 5. Parts list/D of C 6. Warranty Reg Card. To ...
Page 8 - OPERATING THE MOWER
8 9 Fig. 7 Fig. 8 Fig. 9 Fig. 10 OPERATING THE MOWER Controls Operate all control levers several times and ensure that the cables move freely. Check that the engine stop and ground drive clutch levers return freely to their rest position when released. (Refer fig.7) IMPORTANT: To avoid damage to the...
Page 10 - Friction Disc; Non Grassed Areas; Engine Detail; OPERATING THE MOWER / MAINTENANCE SCHEDULE
10 11 Friction Disc The cutterblade is driven by the engine via a friction disc to help prevent damage occurring to the engine crankshaft and cutting mechanism when a hidden obstruction or overload is encountered. (Refer fig.18) Always stop the engine when a hidden obstruction or excessive vibration...
Page 11 - MOWER MAINTENANCE
11 MOWER MAINTENANCE Carburettor Adjustments Should only be made by an authorised Briggs & Stratton dealer. Under no circumstances should the engine be adjusted to run at a speed in excess of that shown on the Declaration of Conformity. Oil Service Check the oil level daily before starting the e...
Page 13 - Cutterblade Sharpening; Storage
13 Cutterblade Sharpening A slightly worn cutterblade may be re-sharpened. Both blade edges must be sharpened equally to ensure balance. Sharpen the cutterblade every 25 mowing hours or more frequently if conditions require. Remove the cutterblade from the mower and clean using a brush and water. In...
Page 14 - Battery Charging
15 14 Battery Charging (Code 491 only) - PREVENT ACCIDENTS: ALWAYS charge the battery in a well ventilated area. - NEVER charge the battery near naked flames or direct heat. - ALWAYS switch off the mains electricity supply before disconnecting the charger from the battery. - ALWAYS use the battery c...
Page 15 - LAWN CARE CALENDAR
15 January There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. February Rake the grass thoroughly. Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary. March The yearly lawn work p...
Page 16 - TROUBLE SHOOTING
16 17 TROUBLE SHOOTING PROBLEM CAUSES CORRECTIVE ACTION Engine will not turn over 1. Engine stop lever released 2. Incorrect oil level 3. Obstruction under deck 4. Battery discharged (if fitted) 1. Operate engine stop lever 2. Check oil level 3. Remove obstruction 4. Charge battery Engine smokes 1. ...
Page 17 - WARRANTY
17 LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of major proprietry components ie. engines, gearbox / ...
Page 20 - DEALER ST; CUSTOMER INFORMATION
20 Date of Sale:- Your Local Dealer:- CODE SERIAL NO. Engine Type:- Engine:- DEALER ST AMP 1st Y ear (12 months ) We certify t hat this service h as been carried out by an Authorised Hayter Service Dealer Date: 1st Y ear (12 months ) Owner ’s Name : Serial Number: Date: 2nd Y ear (24 months ) We cer...
