Havis-Shields WGI-D23-1 & 6 - Manual
Havis-Shields WGI-D23-1 & 6 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
WGI-D23-INST-10-06
INSTALL INSTRUCTIONS WGI-D23-1 & 6
INTERIOR WINDOW GUARDS
2006-2007 DODGE CHARGER
TOOLS REQUIRED:
Power drill
Drill bits – 1/8”, 5/32”
T-25 tamperproof torx bit
Phillips screwdriver
HARDWARE:
QTY DESCRIPTION
PART
#
2
Upper mounting bracket
WGI-MB-12-90
8
#10 x ¾” Sheet metal screw
GSM33195
8
#10 x ½” Sheet metal screw
GSM33194
4
¼” x ½” T-25 Tamperproof bolts
GSM34190
4
¼” Flat Washers
GSM31005
Always
!
Read all instructions before installing any Havis-Shields Equipment Corp products.
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
SUBASSEMBLY:
1.
Bend window guard so it contours the door as
shown in
photo #1
.
2.
Determine the proper window guard for each
window.
3.
If installing aluminum door panels refer to those
instructions at this time. They will need to be
installed first.
Photo 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
