Havis-Shields WGI-C14 - Manual
Havis-Shields WGI-C14 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
WGI-C14-INST-1-04
INSTALLATION INSTRUCTIONS
MODEL WGI-C14
INTERIOR WINDOW GUARDS
2000-2004 CHEVY TAHOE & GMC YUKON
TOOLS REQUIRED:
Safety goggles
Power drill
Phillips screwdriver
1/8” drill bit
HARDWARE REQUIRED:
QTY DESCRIPTION PART
#
24
#10 x ½” Phillips flat head sheet metal screw
GSM33150
36
#10 x 3/4” Phillips pan head sheet metal screws
GSM33195
INSTALLATION PROCEDURE:
1. Determine the proper cage for each window. Each guard has part number on lower left corner.
2.
Side Passenger Door Windows
– Hold the screen up to the window frame. Make sure you have an
even fit. Mark mounting holes and drill out with the 1/8” drill bit. Use #10 x ½” flat head sheet
metal screws to attach screens to door window frame.
Note: Do not over tighten screws.
After the
1/8” holes are drilled, it is helpful to indent the holes inward with a punch. This will enable the
mounting screws to grab better.
3.
Side Cargo Area Windows
– Carefully remove interior plastic trim that surrounds windows.
Position window guard into window frame. (Guard will be approximately ½” from glass). Drill
mount holes in window frame with 1/8” drill bit and attach guard with #10 x ¾” sheet metal screws.
Install interior trim back to original location.
Note: Trim should fit back on without modification, although plastic sometimes needs to be shaved
to allow clips to go on properly.
4.
Rear Door Windows
– These guards are mounted the same way as the side cargo windows.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
