Havis-Shields KK-ST-FLIP - Manual
Havis-Shields KK-ST-FLIP – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
INSTALL INSTRUCTIONS KK-ST-FLIP
FLIP DOWN REAR STEP OPTION
(For Rear Permanent Mount Step order with KK-x-ST-RP)
TOOLS REQUIRED:
Ratcheting
wrench
Standard socket set
Open-end wrench set
Power drill
Drill bit set
HARDWARE:
QTY DESCRIPTION PART
#
10
½” x 1 ½” Hex head bolt
GSM33050
4
½” x 3 ½” Hex head bolt
GSM33055
32
½” Flat washer
GSM31012
10
½” Lock washer
GSM31030
4
½” Nylock nut
GSM30020
10
½” Hex nut
GSM30011
2
¼” Stainless nylock nut
GSM30046
SUB ASSEMBLY:
1. Confirm receipt of all parts.
2. Flip down portion of step will come assembled.
3. Slide Support Channels into the Step.
4. Bolt together using (4) ½” x 4” Hex Head Bolts, ½” Nylock Nuts, ½” Flat Washers.
Note: Be sure that flat side of Support Channels face towards outside of vehicle
INSTALLATION:
1. MOUNT FRAME BRACKETS:
•
Determine Driver and Passenger side Frame Brackets using view on final page.
•
Line brackets up with holes in frame rail of vehicle.
•
Bolt brackets to frame using (4) ½” x 1 ½” Hex Head Bolts, ½” Hex Head Nuts,
½” Flat Washers, and ½” Lock Washers
•
Do not tighten hardware at this time.
Note: FORD VANS
Only:
You must use a spacer between the Frame Rail and the Frame
Bracket on the forward mounting holes. Use (2) ½” Supplied flat washers
2. MOUNT STEP AND RAIL ASSEMBLY:
•
Step can be mounted at various heights.
•
With height determined, loosely bolt Assembly to Frame Brackets using (6)
½” x 1 ½” Hex Head Bolts, ½” Hex Head Nuts, ½” Flat Washers, and ½” Lock
Washers
3. FINAL SQUARING:
•
With step square at desired height, tighten all hardware.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
