Havis-Shields DS-PAN-103 - Manual
Havis-Shields DS-PAN-103 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
*RECOMMENDED HOLES
FOR MOUNTING WITH
3 SCREWS*
*
RECOMMENDED HOLES
FOR MOUNTING WITH
2 SCREWS*
(4X) 1/4-20 X 5/8" BHCS
(
120 +/-10% IN-LBS
)
(3X) 1/4-20 X 5/8" BHCS
(
120 +/-10% IN-LBS
)
*USE 3 SCREWS TO FASTEN
DOCK DOWN IF POSSIBLE*
(MOUNTING BRACKET OF
DOCKING STATION)
(SHEET 1 OF 2)
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
PRODUCT NAME
DRAWING NUMBER:
1. REMOVE THE 1/4-20 X 5/8" BHCS HOLDING THE MOUNTING
BRACKET TO THE REST OF THE DOCKING STATION (THE SCREWS
IN THE PLASTIC SIDE-MEMBERS ON EACH SIDE OF THE DOCK).
PULL MOUNTING BRACKET OFF OF DOCKING STATION.
2. SET MOUNTING BRACKET ON TOP OF DESIRED SURFACE SO
THAT 3 OF THE HOLES ON THE MOUNTING BRACKET LINE UP WITH
3 TAPPED HOLES OF THE MOTION ACCESSORY. (IF 3 HOLES ARE
NOT AVAILABLE THEN USE 2.) SEE *RECOMMENDED HOLES* OF
THE MOUNTING BRACKET.
3. FASTEN THE MOUNTING BRACKET TO THE MOTION ACCESSORY
USING (3X) 1/4-20 X 5/8" BHCS (OR 2 DEPENDING ON AVAILABILITY).
4. PLACE DOCKING STATION OVER TOP OF MOUNTING BRACKET
SO THAT THE 2 THREADED HOLES IN EACH FLANGE OF THE
MOUNTING BRACKET LINE UP WITH THE 2 HOLES IN EACH PLASTIC
SIDE-MEMBER.
5. FASTEN THE DOCKING STATION BACK TO THE MOUNTING
BRACKET USING (4X) 1/4-20 X 5/8" BHCS.
6. TIGHTEN ALL FASTENERS TO THE INDICATED TORQUE
RECOMMENDATIONS.
THIS PRODUCT IS USED WITH THE PANASONIC
CF-28/29/30 TOUGHBOOK COMPUTERS
(THE FEATURES OF THIS PRODUCT MAY BE LIMITED
DEPENDING UPON THE MODEL OF COMPUTER USED.)
HARDWARE KIT CONTENTS:
REV. DATE
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
DS-PAN-101
DOCKING STATION
01-30-07
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
D3-0036-IS-G
PRODUCT DESCRIPTION
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
PRODUCT NAME
REV. DATE
12-07-09
DRAWING NUMBER:
DS-PAN-101
INSTALLATION INSTRUCTIONS:
WARNING: ALL HAVIS INC. PRODUCTS ARE DESIGNED WITH SAFETY OF USE AND INSTALLATION IN MIND. HOWEVER,
IT IS THE SOLE RESPONSIBILITY OF THE OWNER/OPERATOR OF A VEHICLE USING HAVIS INC. MOUNTING AND
DOCKING EQUIPMENT, TO INSURE THAT THE EQUIPMENT IS INSTALLED SO THAT IT WILL NOT INTERFERE WITH VEHICLE
OPERATION, INTERFERE WITH SAFETY DEVICES, OBSTRUCT VIEW OF DRIVING CONDITIONS, OR IN ANY WAY
DEGRADE OCCUPANT SAFETY. IMPROPER INSTALLATION CAN CAUSE SERIOUS INJURY IN THE EVENT OF AN
ACCIDENT. INSTALLATION SHOULD ONLY BE PERFORMED BY QUALIFIED PROFESSIONALS. COMPUTERS AND
MOTION DEVICES MUST BE MOVED TO AND STOWED/SECURED IN THEIR SAFE DRIVING POSITIONS BEFORE
OPERATING VEHICLE.
6.6
WWW.HAVIS.COM
1-800-524-9900
F-730-019 REV A
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
