Havis-Shields C-VS-1800-ECO - Manual
Havis-Shields C-VS-1800-ECO – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
C-VS-1800-ECO_INST_9-07
INSTALL INSTRUCTIONS C-VS-1800-ECO
2004-2008 FORD ECONOLINE VAN
TOOLS REQUIRED:
3/8” Standard Socket Set
3/8” Metric Socket Set
3/8” Ratcheting Wrench
Powered drill w/ drill bit set
Open-end wrench set
Screw driver set
HARDWARE & COMPONENTS:
QTY DESCRIPTION PART
#
6
¼-20 Nylock nut
GSM30016
4
¼” Flat washer
GSM31005
2
¼-20 x ¾” Carriage bolt
GSM32000
4
¼-20 x 1 ¼” Hex head bolt
GSM33003
4
#10 x 1” Phillips sheet metal screw
GSM33196
1
Torx Screw Hardware Kit
C-HK-1
Always
!
Read all instructions before installing any Havis-Shields Equipment Corp products.
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
INSTALL C-VS-1800-ECO:
1.
Remove O.E.M. engine cover accessory package (cup holder/storage pocket).
2.
Place new console housing with mount brackets against engine cover and
floor. Mark engine cover and drill four (4) - 5/16” diameter holes. Mark
outline of floor bracket.
Also remove
washers from studs
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
