Havis-Shields C-TSM-CV-D - Manual
Havis-Shields C-TSM-CV-D – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
1
C-TSM-CV-P_INST_4-08
INSTALL INSTRUCTIONS
C-TSM-CV-D and C-TSM-CV-P
1996-2008 CROWN VICTORIA
DRIVER and PASSENGER - TRUNK SIDE MOUNTS
• Drill with 1/8” and 3/16” drill bits
• Open End Wrench - 3/8”
• Phillips Screwdriver
TOOLS REQUIRED:
QTY: DESCRIPTION:
PART
#:
3
10/32
X
1/2”
Machine
Screw
GSM33118
3
10/32
Keps
Nut
GSM30028
3
#10 x 3/4” Sheet Metal Screw
GSM33195
HARDWARE:
Always!
• Read all instructions before installing any Havis-Shields Equipment Corp products.
• Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
• Use hardware provided with install kit
• For product support: visit the Install Instructions Section of our website at
http://havis.com/Installation/Installation.html, email [email protected] or call 1-800-524-9900.
LINE DRAWING:
h
0.
Passenger Side shown
# C-TSM-CV-P
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
