Havis-Shields C-TCB-31 - Manual
Havis-Shields C-TCB-31 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
C-TCB-31-INST-1-07
INSTALL INSTRUCTIONS C-TCB-31
2004-2007 FORD F-150
(EXCLUDING HERITAGE)
TOOLS REQUIRED:
Standard Socket Set
Open-end Wrench Set
Ratcheting Wrench
HARDWARE:
QTY DESCRIPTION PART
#
1
5/16-18 x 1” Hex head bolt
GSM33012
2
5/16” Flat washers
GSM31006
1
5/16-18 Nylock Nut
GSM30017
SUB ASSEMBLY:
1. Identify hardware and components.
2. Remove inner and outer seat base bolts on passenger side front seat.
INSTALLATION:
1. POSITION C-TCB-31:
•
Lean seat back and slide C-TCB-31 Base between floor of vehicle and seat base on
inner bolt.
•
Screw in factory seat base inner bolt and hand tighten at this time.
•
Slide cross brace under passenger seat base outer bolt.
•
Screw in factory seat base outer bolt and hand tighten at this time.
•
Bolt cross brace to tab on square tube of Base using 5/16-18 x 1” Hex head bolt,
washers and Nylock nut.
•
Tighten all bolts at this time.
Note: It is recommended to mount C-TCB-31 base as far under seat base as possible.
Cross Brace
Inner Pole
Base
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
