Havis-Shields C-TCB-27 - Manual
Havis-Shields C-TCB-27 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
C-TCB-27-INST-3-07
INSTALL INSTRUCTIONS C-TCB-27
DODGE RAM 1500 PICK-UP 2002-2007
DODGE RAM 2500 & 3500 PICK-UP 2003-2007
TOOLS REQUIRED:
3/16” Allen wrench
3/8” Standard Socket Set
3/8” Metric Socket Set
3/8” Ratcheting Wrench
Powered drill w/ 3/16” drill bit
Open-end wrench set
HARDWARE:
QTY DESCRIPTION PART
#
1
Pole support assembly
CM93071-27W
1
Telescoping pole assembly
CM93072-3
1
Lag bolt ¼ x 1
GSM33060
Always
!
Read all instructions before installing any Havis-Shields Equipment Corp products.
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
SUB ASSEMBLY:
1.
Confirm receipt of all hardware and components.
2.
Remove front inner and outer passenger seat bolts on
vehicle.
INSTALLATION:
1. MOUNT C-TCB-27 INTO VEHICLE:
•
Position pole support assembly on top of
passenger seat base mount and align holes in
pole support assembly with holes in seat base.
•
Loosely attached factory seat bolts that were
removed during sub assembly.
•
Tighten down factory passenger seat bolts and
5/16-18-nylock nut holding side support brace
to pole support assembly.
•
Mount optional C-3090, computer-mounting
platform, to telescoping pole assembly using
hardware and instructions provided with
C-3090.
Telescoping pole
assembly
Pole support
assembly
Location of
passenger side factory
seat base bolts
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
