Havis-Shields C-TCB-21 - Manual
Havis-Shields C-TCB-21 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
C-TCB-21-INST-12-04
INSTALL INSTRUCTIONS C-TCB-21
TELESCOPING COMPUTER BASE
1998-2003 DODGE DURANGO
TOOLS REQUIRED:
3/16” Allen wrench
3/8” Standard socket set
3/8” Metric socket set
Ratcheting wrench (3/8” drive)
Powered drill w/ 3/16” drill bit
Open-end wrench set
HARDWARE & COMPONENTS:
QTY DESCRIPTION PART
#
1
Pole support assembly
CM93071-21
1
Telescoping pole assembly
CM93072-3
1
Side support brace
CM93146
1
5/16-18 Nylock nut
GSM30017
1
5/16” Flat washer
GSM31006
2
¼” x 1” Hex head lag bolts
GSM33060
Always
!
Read all instructions before installing any Havis-Shields Equipment Corp products.
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
¼” x 1”Hex
head lag bolts
5/16-18
Nylock nut
Side support
brace
Telescoping pole
assembly
Pole support
assembly
Location of
passenger side factory
seat base bolts
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
