Havis-Shields C-TCB-19 - Manual
Havis-Shields C-TCB-19 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
C-TCB-19-INST-8-05
INSTALL INSTRUCTIONS C-TCB-19
UNIVERSAL SIDE MOUNT
TOOLS REQUIRED:
3/16” Allen wrench
3/8” Standard Socket Set
3/8” Ratcheting Wrench
Powered drill w/ drill bit set
Open-end wrench set
HARDWARE:
QTY DESCRIPTION PART
#
1
Pole support assembly
CM93071-19
1
Telescoping pole assembly
CM93072-1
8
¼-20 Nylock nut
GSM30016
16
¼” Flat washer
GSM31005
8
¼-20 x ¾” Hex head bolt
GSM33001
Always
!
Read all instructions before installing any Havis-Shields Equipment Corp products.
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
SUB ASSEMBLY:
1.
Confirm receipt of all hardware and components.
2.
Determine location to mount TCB.
INSTALLATION:
1. MOUNT SUPPORT BRACKETS:
•
With location determined, mark mounting holes using
lower support bracket as template.
•
Drill ¼” holes on these marks.
•
Attach lower support bracket to desired surface using ¼-20
x ¾” hex head bolts, washers and nylock nuts.
•
Following same procedure for lower support bracket mark
and drill holes for upper support bracket.
•
Mount optional C-3090, computer-mounting platform, to
telescoping pole assembly using hardware and instructions
provided with C-3090.
Upper
Support
Bracket
Lower
Support
Bracket
Telescoping pole
assembly
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
