Havis-Shields C-TCB-10 - Manual
Havis-Shields C-TCB-10 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
INSTALL INSTRUCTIONS C-TCB-10
1996-2006 FORD TAURUS
TOOLS REQUIRED:
3/16” Allen wrench
3/8” Standard Socket Set
3/8” Metric Socket Set
3/8” Ratcheting Wrench
Powered drill w/ drill bit set
Standard Open-end wrench set
HARDWARE:
QTY DESCRIPTION PART
#
1
Pole support assembly
CM93071-10
1 Telescoping
pole
CM93072-1
1
Under floor plate
CM93132
1
Lateral support brace
CM93148
1
Side support brace
CM93149
2
¼-20 Nylock nut
GSM30016
1
5/16-18 Nylock nut
GSM30017
2
3/8-16 Nylock nut
GSM30018
4
¼” Flat washer
GSM31005
1
5/16” Flat washer
GSM31006
5
3/8” Flat washer
GSM31007
2
¼-20 x ¾” Hex head bolt
GSM33001
2
3/8-16 x ¾” Hex head bolt
GSM33027
1
3/8-16 x 1 ¼” Hex head bolt
GSM33029
Always
!
Read all instructions before installing any Havis-Shields Equipment Corp products.
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
SUB ASSEMBLY:
1.
Confirm receipt of all hardware and components.
2.
Remove front passenger seat base trim.
INSTALLATION:
1. MOUNT POLE SUPPORT ASSEMBLY:
•
Align pole support assembly’s slotted hole with similar slot on seat base and loosely
attach using 3/8-16 x ¾” bolt, washer and nut.
•
Loosely attach smaller slot on assembly to seat base using ¼-20 x ¾”
•
Repeat these processes attaching the side support brace to passenger seat base.
•
Now loosely attach the side support brace and lateral (forward) support base to pole
assembly using 5/16” Nylock nut.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
