Havis-Shields C-3311-2 - Manual
Havis-Shields C-3311-2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
- 1 -
INSTALL INSTRUCTIONS C-3311-2 & C-3311-18-2
SLIDE-OUT TRUNK TRAY
2006-2008 CHEVROLET IMPALA
TOOLS REQUIRED:
7/16” wrench
Powered drill w/ 3/16” drill bit
Ratcheting wrench
Standard socket set
Screwdriver set
HARDWARE:
QTY DESCRIPTION PART
#
12
¼-20 x ¾” Hex head bolts
GSM33001
16
¼” Flat washers
GSM31005
12
¼-20 Serrated nuts
GSM30023
4
8-32 x 3/8” Machine Screws
GSM33540
4
8-32 Keps Nuts
GSM30027
4
¼” x ¾” Hex head lag bolts (only on C-3311-18-2)
GSM33060-1
2
Front Mounting Leg
CM001390
1
Rear Driver-side bracket
CM001391
1
Rear Passenger-side bracket
CM001392
4
Mounting plate w/ pem ¼” pem studs (Use 2 on C-3311-18-2)
CM001393
1
P.S. Front Mounting Bracket (only on C-3311-18-2)
CM001394
1
P.S. Rear Mounting Adapter Bracket (only on C-3311-18-2)
CM93712
Always
!
Read all instructions before installing any Havis-Shields Equipment Corp products.
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
For product support, visit the Install Instructions Section of our website at
http://havis.com/Installation/Installation.html
SUB ASSEMBLY:
(Use Iso views on page #1 & 2 for sub assemblies)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
