Grizzly Industrial T25688 - Manual

Model T25688 (Mfg. Since 09/13) -5- ELEcTRIcaL EQuIPMENT INJuRy RISKS. you can be shocked, burned, or killed by touching live electrical components or improperly grounded machinery. to reduce this risk, only allow qualified service personnel to do electrical installation or repair work, and always d...

Model T25688 (Mfg. Since 09/13) -7- additional Safety for Slip Rolls OvERLOaDINg. overloading this machine can cause injury from flying parts or property damage. do not exceed the machine capacities. SEcuRINg SLIP ROLL. before using, secure the slip roll to a sturdy vise that is securely fastened to...

Model T25688 (Mfg. Since 09/13) -9- cleanup Site considerations figure 4. minimum working clearances. The unpainted surfaces of your machine are coated with a heavy-duty rust preventative that prevents corrosion during shipment and storage. This rust preventative works extremely well, but it will ta...

-10- Model T25688 (Mfg. Since 09/13) bench Mounting figure 6. example of a "direct mount" setup. Machine Base Workbench Lag Screw Flat Washer another option is a "direct mount" (see example below) where the machine is secured directly to the workbench with lag screws and washers. the...

Model T25688 (Mfg. Since 09/13) -11- SEcTION 3: OPERaTIONS To reduce your risk of serious injury, read this entire manual bEfORE using machine. If you are not experienced with this type of machine, WE STRONgLy REcOMMEND that you seek additional training outside of this manual. Read books /magazines ...

Model T25688 (Mfg. Since 09/13) -13- creating bends this slip roll can easily create constant-radius bends in sheet metal up to 22 gauge. Note: The method for creating a specific radius is a trial-and-error process. Due to the many varia-tions among metal workpieces, no single position-ing will crea...

Model T25688 (Mfg. Since 09/13) -15- creating cylinders this slip roll can be used to easily and accurately create cylinders if you know the diameter of the cylinder you want to create, use the formula below to calculate the length of material needed. c = π d C=Circumference (length of material need...

Model T25688 (Mfg. Since 09/13) -17- bending Wire this slip roll can be used to shape wires, rods, and small-diameter tubing. the wire grooves can also be used when rolling sheet metal that has a wire bead at one end. To use the wire grooves: 1. place the workpiece into the smallest pos- sible groov...

-18- Model T25688 (Mfg. Since 09/13) figure 27. Releasing top roller. 2. Slide the top roller out from the base (see figure 27). remove the workpiece from the top roller, then slide the top roller back into the base. 3. move the top roller back into position and slide the removable bushing in to sec...

Model T25688 (Mfg. Since 09/13) -19- SEcTION 4: accESSORIES aCCeSSorieS Installing unapproved accessories may cause machine to malfunction, resulting in serious personal injury or machine damage. To reduce this risk, only install accessories recommended for this machine by grizzly. NOTICE Refer to o...

-20- Model T25688 (Mfg. Since 09/13) SEcTION 5 : MaINTENaNcE cleaning Lubrication Schedule For optimum performance from the machine, fol-low this maintenance schedule and refer to any specific instructions given in this section. Daily check:• loose mounting bolts. • any other unsafe condition. Weekl...

Model T25688 (Mfg. Since 09/13) -21- Review the troubleshooting and procedures in this section if a problem develops with your machine. If you need replacement parts or additional help with a procedure, call our Technical Support at (570) 546-9663. Note: Please gather the serial number and manufactu...

C U T A LO N G D O T T E D LI N E Name _____________________________________________________________________________ Street _____________________________________________________________________________City _______________________ State _________________________ Zip _____________________Phone # _____...