Grizzly Industrial T25227 - Manual

T25227 (Mfg. since 09/13) -5 - section 2: introduction We are proud to offer this manual with your new oscillating multi-tool! We've made every effort to be exact with the instruc-tions, specifications, drawings, and pho-tographs of the multi-tool when writing this manual. however, sometimes we stil...

T25227 (Mfg. since 09/13) -7 - assembly the t25227 oscillating Multi-tool comes with several accessory tools for a variety of jobs. With the groove and rivet design, each accessory tool can be mounted in 12 different directions. Choose the most effective direction to complete the job con-sidering st...

T25227 (Mfg. since 09/13) -8 - prior to using the multi-tool for the first time, perform this test run procedure to ensure it functions properly. to test run multi-tool: 1. Connect the tool to power. 2. While firmly holding multi-tool tool, push the switch forward to turn it ON. test run 3. using yo...

T25227 (Mfg. since 09/13) -9 - section 4: operations the variable-speed dial adjusts the multi-tool between 15,000 and 22,000 oscilla-tions per minute (opM). the speed dial can be set before starting the tool or while in use. variable-speed dial accidental start hazard! disconnect power before servi...

T25227 (Mfg. since 09/13) -10 - use the 3 5 ⁄ 8 " triangular platen accessory and either a red or white sanding pad. the sanding pads use a hook-and-loop system, which provides easy attachment and removal. to install the sanding pad, align the pad with the platen and press on firmly (see figure ...

T25227 (Mfg. since 09/13) -11 - sawing /cutting this multi-tool comes with wood and metal saw blades and a radial saw blade for cut-ting a variety of materials. tips for sawing /cutting: • practice on similar scrap material and inspect results before working on intended workpiece. • use light-to-med...

T25227 (Mfg. since 09/13) -12 - section 5: accessories t25148 —1 1 ⁄ 8 " flush cut saw blade Flush-Cut Saw Blades are ideal for wood and metal and feature a fine tooth count for smooth cuts. figure 7. Flush-cut saw blade. t25151—3 7 ⁄ 16 " hss radial saw blade Constructed of high speed steel...

T25227 (Mfg. since 09/13) -14 - section 6: maintenance ! always disconnect poWer before servicing, adjusting, or doing maintenance to reduce the risk of accidental injury or electrocution. never submerge tool in liquid or clean with flammable solvents. electrocution or fire may result, causing serio...

T25227 (Mfg. since 09/13) -15 - troubleshooting symptom possible cause solution Multi-tool does not start. 1. power supply circuit breaker tripped or blown. 2. on/oFF switch at fault.3. Motor at fault.4. Motor brushes at fault. 1. Ensure circuit is sized cor- rectly and free of shorts. reset circuit...

T25227 (Mfg. since 09/13) -17 - Warranty Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterat...