Grizzly Industrial T25100 - Manual

Model T25100 (Mfg. Since 8/12) -7- SECTION 2: POWER SuPPLY Availability for your own safety and protection of property, consult an electrician if you are unsure about wiring practices or electrical codes in your area. Before using the Model t25100, consider the availability and proximity of the requ...

-10- Model T25100 (Mfg. Since 8/12) Children and visitors may be seriously injured if unsu- pervised around this tool. Lock entrances to the shop or disable start switch or power connection to prevent unsupervised use. Site Considerations Space Allocation Consider the largest size of workpiece that ...

Model T25100 (Mfg. Since 8/12) -11- SECTION 4: OPERATIONS To complete a typical operation, the operator does the following: 1. Examines the metal workpiece to make sure it is dry, clean, and suitable for powder coat-ing. sandblasting the workpiece is one effi-cient method of cleaning it. 2. places t...

-12- Model T25100 (Mfg. Since 8/12) basic Controls & Components use figures 5–7 and the following descriptions to gain a better understanding of the Model t25100 controls and components. figure 5. Control box panel. a B C D E F A. Power Lamp. illuminates when power is enabled to the control box....

Model T25100 (Mfg. Since 8/12) -13- Operational Points Adhere to the following points for the best powder coating results: • the workpiece Must be clean of debris, paint, or other non-metal material. Depending upon the application, cleaning may be as simple as using mineral spirits and clean rags, o...

-14- Model T25100 (Mfg. Since 8/12) Workpiece Preparation The powder coating system is designed to ONLY operate on solid, electrically-conduc- tive metal workpieces. follow these workpiece preparation guide- lines for the best results: • thoroughly clean the workpiece of paints or other finishes, re...

-16- Model T25100 (Mfg. Since 8/12) SECTION 5: ACCESSORIES aCCEssoriEs Installing unapproved accessories may cause machine to malfunction, resulting in serious personal injury or machine damage. To reduce this risk, only install accessories recommended for this machine by Grizzly. NOTICE Refer to ou...

Model T25100 (Mfg. Since 8/12) -17- SECTION 6: MAINTENANCE Cleaning For optimum performance from your tool, follow this maintenance schedule and refer to any spe-cific instructions given in this section. Daily Check:• Damaged spray gun components. • Worn or damaged wires/cables. • any other unsafe c...

-18- Model T25100 (Mfg. Since 8/12) Review the troubleshooting and procedures in this section if a problem develops with your machine. If you need replacement parts or additional help with a procedure, call our Technical Support at (570) 546-9663. Note: Please gather the serial number and manufactur...