Grizzly Industrial T20644 - Manual

Page 3 - Safety Instructions For Pneumatic Tools; For Your Own Safety Read Instruction Manual; SAFETY; NOTICE

T20644 34° Angle Finish Nailer–2½" -2 - Safety Instructions For Pneumatic Tools 1. KEEP ALL SAFETY DEVICES IN PLACE and in working order. 2. REMOVE ADJUSTING KEYS AND WRENCHES . Form habit of check- ing to see that keys and adjusting wrenches are removed from tool before operation. 3. KEEP WORK ...

Page 5 - Additional Safety Instructions for Nailers

T20644 34° Angle Finish Nailer–2½" -4 - Additional Safety Instructions for Nailers 1. HAND INJURIES: Do not place your hands near the nail point of entry. A nail can deflect and tear through the surface of the workpiece, puncturing your hand or fingers. 2. COMBUSTIBLE GASES: Never con- nect the ...

Page 7 - INTRODUCTION; Foreword

T20644 34° Angle Finish Nailer–2½" -6 - INTRODUCTION If you have any comments regarding this manual, please contact us: Grizzly Industrial, Inc. C/O Technical Documentation Manager P.O. Box 2069 Bellingham, WA 98227-2069 Email: [email protected] Most importantly, we stand behind our tools. If ...

Page 8 - SETUP; Inventory

T20644 34° Angle Finish Nailer–2½" -7 - SETUP Your Model T20644 left our warehouse in a carefully packed box. If you discover the nailer is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for advice. Save the containers and all packing mate-...

Page 9 - Compressed Air

T20644 34° Angle Finish Nailer–2½" -8 - The Model T20644 is designed to be oper-ated at 60-100 PSI using clean, dry, regu-lated, compressed air. DO NOT exceed the 120 PSI maximum operating pres-sure for your model. Before using your new nailer, regulate the air pressure to find the optimum setti...

Page 10 - Safety Yoke

T20644 34° Angle Finish Nailer–2½" -9 - Safety Yoke A safety yoke mechanism on the nose of the nailer acts as a secondary safety device. When the trigger is pressed, the nailer will not fire until the safety yoke mechanism is depressed. Before you use your nailer for the first time, check the sa...

Page 11 - OPERATIONS; Loading

T20644 34° Angle Finish Nailer–2½" -10 - OPERATIONS Loading When replacing nails in your Model T20644, follow these guidelines: Gauge: ................................................... 15Length:........................................ 1 1 ⁄ 4 " -2 1 ⁄ 2 " Capacity: .......................

Page 12 - Operating; Adjusting Depth

T20644 34° Angle Finish Nailer–2½" -11 - Operating If you have not read the safety instruc-tions in this manual, do not operate the nailer. Before you operate your nailer, place one drop of the included oil into the quick con-nect fitting where the nailer connects to the air supply. To operate y...

Page 15 - ACCESSORIES

T20644 34° Angle Finish Nailer–2½" -14 - ACCESSORIES G2820 —Pneumatic Tool Oil 8 oz.G2821—Pneumatic Tool Oil 1 Pint Use the right oil! This pneumatic tool oil offers outstanding heat displacement and friction reduction without eating away at delicate air components like detergent motor oils. Sto...

Page 16 - CLEANING & LUBRICATION; Cleaning

T20644 34° Angle Finish Nailer–2½" -15 - CLEANING & LUBRICATION Cleaning Use non-flammable solvent to clean the nose assembly of the nailer. Always be sure that the nailer is dry before using it again. Do not allow dust, chips, sand, etc. into the air connectors or into the body of the naile...

Page 17 - PARTS BREAKDOWN

T20644 34° Angle Finish Nailer–2½" -16 - PARTS BREAKDOWN � � � � � � � � � �� ...

Page 18 - PARTS LIST

T20644 34° Angle Finish Nailer–2½" -17 - PARTS LIST REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PT20644001 SPECIAL CAP SCREW 51 PT20644051 SPACER 2 PT20644002 AIR DEFLECTOR 52 PEC09M E-CLIP 6MM 3 PT20644003 RUBBER WASHER 53 PT20644053 COMPRESSION SPRING 4 PSB38M CAP SCREW M5-.8 X 25 54 PT206...

Page 19 - TROUBLESHOOTING; Symptom

T20644 34° Angle Finish Nailer–2½" -18 - TROUBLESHOOTING Symptom Possible Cause Solution Air leaking at trig-ger valve area. 1. O-rings in trigger valve hous- ing are damaged. 1. O-rings must be replaced & operation of safety nose must be checked. Air leaking. 1. Loose screws in housing.2. D...

Page 20 - WARRANTY AND RETURNS

Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of mainte-nance. This is Gri...

Grizzly Industrial T20644 - Manual

Table of Contents:

Summary

Other Grizzly Industrial Models