Grizzly Industrial T10877 - Manual
Grizzly Industrial T10877 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
For questions or help with this product contact Tech Support at (570) 546-9663 or [email protected]
MODEL T10877
CANISTER FILTER
FOR G0710/G0710P
INSTRUCTIONS
COPYRIGHT © APRIL, 2015 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
(FOR MODELS MFD. SINCE 03/15) #WK17321 PRINTED IN TAIWAN
V1.04.15
Description Qty
A. Canister Filter ............................................. 1
B. Collection Flange........................................ 1
C. Connection Collar ....................................... 1
D. Bag Clamp .................................................. 1
E. Collection Bag ............................................ 1
F. Clean-Out Crank Handle Assembly ........... 1
G. Adhesive Foam Strips (Not Shown)
Short (For Flange) ...................................... 1
Long (For Filter) .......................................... 1
H. Hardware Bag (Not Shown)
Flange Screw
1
⁄
4
"-20 x
3
⁄
4
" ........................... 6
Flat Washer
5
⁄
16
" ......................................... 4
Hex Nut
5
⁄
16
"-18 ........................................... 2
Hex Bolt
5
⁄
16
"-18 x 2" ................................... 2
Open-End Wrench 10 x 12mm ................... 1
Inventory
Introduction
This kit includes everything you need to upgrade
your G0710 or G0710P dust collector with a
1-micron canister filter and plastic collection bag.
The canister filter is equipped with an internal
cleaning system that is operated by the external
crank handle. Rotating this handle 5 or 6 times
will knock loose any built-up dust inside the filter,
thereby improving airflow. The plastic collection
bag is replaceable, so it can be tied off and dis-
posed of—without increasing your exposure to
fine dust.
Figure 1. Model T10877.
C
D
E
F
A
B
Installing Canister Filter
1. DISCONNECT MACHINE FROM POWER!
2. Remove bag clamp and filter bag from G0710/
G0710P collector body.
Properly seal all connection points when
installing filter kit to reduce potential expo-
sure to fine dust from leaks.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
