Grizzly Industrial T10726 - Manual

-6- Model T10726 (Mfg. Since 12/12) Additional Safety for Brakes cRUShINg & AMPUTATION INJURIES. the brake can quickly crush or amputate fingers or hands. Never place fingers or hands underneath fingers. SEcURINg Brake. Before using, secure brake to a sturdy vise that is securely fastened to a w...

-8- Model T10726 (Mfg. Since 12/12) cleanup Workbench Load refer to Specifications on Page 3 for the weight of your machine. some workbenches may require additional reinforcement to support both the machine and materials. Placement Location Consider existing and anticipated needs, size of material t...

-10- Model T10726 (Mfg. Since 12/12) SEcTION 3: OPERATIONS If you are not experienced with this type of machine, WE STRONgLy REcOMMEND that you seek additional training outside of this manual. Read books /magazines or get formal training before beginning any proj- ects. Regardless of the content in ...

Model T10726 (Mfg. Since 12/12) -11- 4. slowly lower the operating lever until the bend in the workpiece reaches the desired angle (see figure 7 for an example). Note: Make sure the finger points are directly over the finger receiver groove as you lower the lever. 5. lift the operating lever to rais...

-12- Model T10726 (Mfg. Since 12/12) SEcTION 4: AccESSORIES ACCessories Installing unapproved accessories may cause machine to malfunction, resulting in serious personal injury or machine damage. To reduce this risk, only install accessories recommended for this machine by grizzly. NOTICE Refer to o...

-14- Model T10726 (Mfg. Since 12/12) SEcTION 5: MAINTENANcE regular maintenance on the Model t10726 will ensure its optimum performance. Make a habit of inspecting your brake each time you use it. There are three main areas to maintain on the Model T10726: • fingers and finger Receiver. After han-dl...

Model T10726 (Mfg. Since 12/12) -15- Review the troubleshooting and procedures in this section if a problem develops with your machine. If you need replacement parts or additional help with a procedure, call our Technical Support at (570) 546-9663. Note: Please gather the serial number and manufactu...

-16- Model T10726 (Mfg. Since 12/12) finger Alignment to produce straight bends, the finger points (see figure 18) must all be aligned evenly. When moving or re-installing the fingers, there is play in the vertical positioning which can be used to align the fingers. look along the length of the fing...

Model T10726 (Mfg. Since 12/12) -17- 1 2 3 4 5 7 8 9 10 11 12 13 14 15 16 17 19 20 21 22 Main SEcTION 7: PARTS Please Note: We do our best to stock replacement parts whenever possible, but we cannot guarantee that all parts shown here are available for purchase. Call (800) 523-4777 or visit our onli...

-18- Model T10726 (Mfg. Since 12/12) 31 32 33 34 35 Labels REF PART # DESCRIPTION REF PART # DESCRIPTION 31 PT10726031 ID LABEL 34 PT10726034 EYE INJURY HAZARD LABEL 32 PT10726032 HAZARD STRIP LABEL 35 PPAINT-01 GRIZZLY GREEN TOUCH-UP PAINT 33 PT10726033 PINCH HAZARD LABEL Safety labels help reduce ...

C U T A LO N G D O T T E D LI N E Name _____________________________________________________________________________ Street _____________________________________________________________________________City _______________________ State _________________________ Zip _____________________Phone # _____...

Buy Direct and Save with Grizzly ® – Trusted, Proven and a Great Value! ~Since 1983~ ORDER 24 HOURS A DAY! 1-800-523-4777 Visit Our Website Today For Current Specials!