Grizzly Industrial T10050 - Manual
Grizzly Industrial T10050 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Identification
- Page 3 – Assembly
- Page 4 – Creating Bends
- Page 5 – NOTICE
- Page 6 – Repetitive Bends
- Page 7 – parts Breakdown & List
- Page 8 – n4RUSTED0ROVENANDA'REAT6ALUE
Inventory (Figure 2)
A.
Bender (not shown) .................................... 1
B.
Bender Handle ........................................... 1
C.
Work Stop Rod ........................................... 1
D
. Hex Bolts M10-1.5 x 40 (Handle) ............... 2
E.
Flat Washers 10mm (Handle) .................... 2
F.
Work Stop ................................................... 1
G.
Work Stop Knob ......................................... 1
H.
Hex Nut M12-1.75 (Work Stop Rod) .......... 1
Specifications
Maximum Workpiece Thickness ........ 3 Ga.(
15
⁄
64
")
Maximum Workpiece Width .............................. 4"
Machine Weight .........................................81 lbs.
MODEL T10050
RIGHT ANGLE
IRON BENDER
INSTRUCTIONS
Figure 1.
Model T10050.
Damage to your eyes, face, and hands could
result from using this item without proper
protective gear, such as safety glasses or a
face shield, and gloves.
Copy Ri GHT © July, 2008 By G Rizzly iN du STRial, iNC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#JB10791 p Ri NTed i N CHi Na
Figure 2.
inventory.
If you need help with your new machine, call our
Tech Support at: (570) 546-9663.
B
C
d
e
F
G
H
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
-2- T10050 Right angle iron Bender Figure 3.. identification. Identification Illustration Legend (Figure 4) Throughout these instructions, diagrams are used to illustrate how the components of the machine are used during the various steps of operation. Familiarize yourself with the following illustr...
T10050 Right angle iron Bender -3- Assembly The Model T10050 requires only minimal assem-bly before use. To assemble the machine: 1.. Connect the bender handle to the machine with the M10-1.5 x 40 hex bolts and 10mm flat washers ( Figure 5 ). Figure 5.. Attaching handle. x2 Handle Hex Bolt Flat Wash...
-4- T10050 Right angle iron Bender Mounting Operations once you have confirmed that your machine is assembled and functioning properly, mount it to a workbench through the holes in the base. Be sure the workbench will remain stable when bending force is applied to the machine. if necessary, anchor t...
