Grizzly Industrial T10042 - Manual
Grizzly Industrial T10042 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Figure 6; Assembly; Figure 3; Figure 5
- Page 3 – Operations; To adjust the brush height:; Maintenance; Figure 9
- Page 4 – When performing this procedure, take; To grease the ratchet assemblies:
- Page 5 – To replace the brushes:
- Page 6 – T10042 Parts & Labels Breakdown and List
COPYRIGHT © NOVEMBER, 2007 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#JB10062 PRINTED IN CHINA
MODEL T10042
26" LAWN SWEEPER
INSTRUCTION SHEET
Figure 1.
Inventory 1.
Figure 2.
Inventory 2.
H
C
D
F
G
E
Inventory (Figures 1 and 2)
A.
Sweeper Assembly (not shown) ................. 1
B.
Leaf Bag (not shown) ................................. 1
C.
Long Bag Rod (27¼") ................................ 1
D.
Short Bag Rod (25½") ................................ 1
E.
Frame Handle ............................................. 1
F.
Frame Legs ................................................ 2
G.
Hex Bolts M6-1 x 30 ................................... 4
H.
Lock Washers 6mm ................................... 4
I.
Hex Nuts M6-1 ........................................... 4
J.
Carriage Bolts M6-1 x 30 ........................... 4
K.
Lock Nuts M6-1 .......................................... 4
L.
Bag Clips .................................................... 4
M.
Hairpin Cotter Pins ..................................... 2
N.
Rubber Caps .............................................. 2
To reduce the risk of injury from using this
product:
•
Do not allow anyone to operate the
sweeper without proper training.
•
Do not allow children to use the sweeper.
•
Always wear proper eye protection
when using the sweeper.
•
If an object becomes lodged in the
sweeper, do not attempt to remove it
while the sweeper brush is moving.
•
Keep all hardware tightened to be sure
the sweeper is in safe working order.
• Thoroughly inspect the sweeper for
damage after striking any foreign
objects.
J
I
K
L
M
N
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
-2- T10042 26" Lawn Sweeper 4. Attach the rubber caps to the end of the short bag rod and insert the rod into the slot in the sweeper assembly, as shown in Figure 6 . Figure 6. Securing short bag rod. Rubber Cap Slot Short Bag Rod Assembly 1. Assemble and attach the frame to the sweep- er assemb...
-3- T10042 26" Lawn Sweeper Operations The Model T10042 can be raised or lowered to achieve the optimal sweeping height for different surfaces and for different operators. The optimal height adjustment allows the operator to handle the sweeper comfortably and positions the brushes so that they e...
-4- T10042 26" Lawn Sweeper 3. Replace the dust cap and allow the oil to pen- etrate for a few minutes. Flip the sweeper on to the other side and repeat Steps 1-3 for the other bushings. Every two years, the ratchet assemblies in each wheel should be cleaned and greased. Note: When performing th...
