Grizzly Industrial H8366 - Manual

MODEL H8366/H8367

JACK STANDS

INSTRUCTION SHEET

Operation Instructions

1.

Before positioning the jack stands under the
vehicle:

a.

Make sure the engine is

OFF

.

b.

Apply the vehicle's emergency brake.

c.

Always block the tires to prevent the

vehicle from rolling.

d.

Set the transmission in PARK (automatic)

or REVERSE (manual).

e.

Raise the vehicle to the appropriate height

with a proper capacity jack and ensure
that it is stable.

2.

Position the jack stands and extend the posts

to the height of the axle, frame, or location
that can support the weight of the vehicle;
and secure the post with the clevis pin and
hairpin cotter pin. Make sure that both jack
stands are at an equal height and that the
saddle is centered under the load points.

3.

Slowly lower the vehicle onto the jack stands,

making sure that the load points are still cen-
tered and all four corners of the stand bases
are still on the ground.

To remove the jack stands, raise the vehicle with
a proper capacity jack until the jack stands are
clear of the vehicle and are able to be removed.
Remove the jack stands while the vehicle is
securely supported by the jack.

To reduce the risk of death, serious person-

al injury or property damage when using

these jack stands:

•

DO NOT overload these jack stands

beyond their rated capacities. The rated

capacity is for a matched pair of jack

stands with an evenly distributed, ver-

tically applied load. Overloading may

result in personal injury or property

damage.

•

Use caution when entering a vehicle

supported by jack stands. Never allow

others to enter a supported vehicle

while anyone is working underneath.

•

Only use these jack stands on a hard

level surface capable of sustaining the

load being supported.

•

Only use the jack stands at appropriate

points on the vehicle that can safely

support the vehicle's weight.

•

Always make sure that vehicle load

points are centered in the saddle and

that all four corners of the jack stand

are firmly on the ground.

•

Always apply the parking brake, and

use wheel chocks against the tires to

prevent accidental rolling.

•

Keep as much of your body as possible

out from underneath the vehicle when

placing or removing the stands.

•

Never modify, weld or alter these jack

stands.

•

Never release a jack stand when it is

supporting a load.

•

Only use these jack stands to support

one end of a vehicle, not a side.

CoPyRighT © DECEMBER, 2007 By gRizzly inDuSTRiAl, inC. REViSED MARCh, 2008

WARNINg: NO pORTION Of THIS MANUAL MAy bE REpRODUCED IN ANy SHApE

OR fORM WITHOUT THE WRITTEN AppROvAL Of gRIzzLy INDUSTRIAL, INC.

#jM10213 PRinTED in ChinA

H8366 Specifications

Weight Capacity ........................................ 2 Tons
height Adjustment .............................. 10

1

⁄

4

"–16

1

⁄

4

"

H8367 Specifications

Weight Capacity ........................................ 3 Tons
height Adjustment .............................. 11

1

⁄

2

"–16

3

⁄

4

"