Grizzly Industrial H8239 - Manual
Grizzly Industrial H8239 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
For questions or help with this product contact Tech Support at (570) 546-9663 or [email protected]
MODEL H8239
SAFETY LOCKING ON/OFF
SWITCH
INSTRUCTIONS
Copyright © ApriL, 2011 By grizzLy industriAL, inC.
WARNING: NO pORTION OF THIS INSTRUCTION SHEET MAY bE REpRODUCED IN ANY SHApE
OR FORM WITHOUT THE WRITTEN AppROvAL OF GRIzzLY INDUSTRIAL, INC.
#ts13931 printed in ChinA
Introduction
the Model h8239 features a large on/oFF pad-
dle with a removable safety key that can be used
to disable the switch. this switch is designed to fit
into
7
⁄
8
" x 1
5
⁄
8
" rectangular hole or mounted over a
1
1
⁄
8
" x 2
1
⁄
4
" rectangular hole with four #5 screws.
Specifications
rated horsepower ........................................ 2hp
rated Voltage ..................................... 125V/250V
rated Current Amperage .............................. 20A
Figure 1. h8239 safety paddle switch.
safety
Key
To reduce risk of serious burns, electrocu-
tion or death when installing this switch:
• Only use this switch to replace an existing
machine switch that has the same physi-
cal configuration and equivalent electrical
specifications/ratings.
• Installation must only be performed by an
electrician or qualified service personnel,
and all applicable electrical codes must
be adhered to.
• Turn off and completely disconnect all
power sources to the machine before
installing the switch.
• Do not use this switch in wet or damp
locations, or near explosive fumes or
flammable liquids. It is not sealed or rated
for these environments.
• Make sure there is a verified machine
ground on the circuit this switch is
installed.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
