Grizzly Industrial H8154 - Manual

Page 3 - Table of Contents

Table of Contents INTRODUCTION ............................................................................................................................... 2 Foreword .....................................................................................................................................

Page 4 - INTRODUCTION; Foreword; Contact Info

-2- H8154 AC/DC Stick/TIG Welder INTRODUCTION Foreword We are proud to offer the Model H8154 AC/DC Stick/TIG Welder. This machine is part of a grow-ing Grizzly family of fine metalworking equipment. When used according to the guidelines set forth in this manual, you can expect years of trouble-free,...

Page 6 - Safety Instructions for

-4- H8154 AC/DC Stick/TIG Welder �� ...

Page 8 - Additional Sources for

-6- H8154 AC/DC Stick/TIG Welder American Welding Society, 550 N.W. LeJeune Road, Miami, FL 33126, (305) 443-9353, Website: www. aws.org . —Safety in welding, Cutting, and Allied Processes, ANSI Standard Z49.1—Recommended Safe Practices for the Preparation for Welding and Cutting of Containers and P...

Page 9 - SECTION 2: CIRCUIT REQUIREMENTS

H8154 AC/DC Stick/TIG Welder -7- SECTION 2: CIRCUIT REQUIREMENTS Circuit Requirements Amperage Draw The Model H8154 welder draws the following amps under maximum load: Draw at 220V, Single Phase ............... 23.8 Amps Circuit Requirements Connect your welder to a dedicated and grounded circuit th...

Page 12 - SECTION 4: OPERATIONS; NOTICE; Operation Safety

-10- H8154 AC/DC Stick/TIG Welder SECTION 4: OPERATIONS NOTICE If you have never used this type of machine or equipment before, WE STRONGLY REC- OMMEND that you read books, trade maga- zines, or get formal training before begin- ning any projects. Regardless of the con- tent in this section, Grizzly...

Page 13 - Welder Controls

H8154 AC/DC Stick/TIG Welder -11- Welder Controls NOTICE After completing the welding operation, keep the power to the welder ON for a period of time to let the welder fan cool the welder down. To avoid damage to your welder, never shut the power OFF before the welder enclosure is completely cool to...

Page 16 - SECTION 5: ACCESSORIES

-14- H8154 AC/DC Stick/TIG Welder SECTION 5: ACCESSORIES ACCESSORIES H7786—Auto Darkening Welding Helmet Automatic UV and IR filters protect eyes from harmful visible and invisible light during welding. Switching time is less than or equal to 2 millisec-onds, so there's no need to flip the helmet up...

Page 17 - Troubleshooting

H8154 AC/DC Stick/TIG Welder -15- Review the troubleshooting and procedures in this section to fix or adjust your machine if a problem devel-ops. If you need replacement parts or you are unsure of your repair skills, then feel free to call our Technical Support at (570) 546-9663. SECTION 6: SERVICE ...

Page 19 - Replacement Parts & Labels

H8154 AC/DC Stick/TIG Welder -17- Safety labels warn about machine hazards and ways to prevent injury. The owner of this welder MUST maintain the original location and readability of the labels on the welder. If any label is removed or becomes unreadable, REPLACE that label before using the welder a...

Page 23 - WARRANTY AND RETURNS

Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance. This is Griz...

Grizzly Industrial H8154 - Manual

Table of Contents:

Summary

Other Grizzly Industrial Models