Grizzly Industrial H8120 - Manual
Grizzly Industrial H8120 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Product Information
•
10,000 RPM
•
Requires 90 PSI
•
Air Consumption 2.8–4.5 CFM @ 90 PSI
•
Requires 6" hook and loop sanding disc with
6-hole pattern
•
1
⁄
4
" NPT female air inlet
•
3
⁄
4
" (ID) dust collection hose
•
Weighs 2.53 lbs.
Inventory
A. Orbital Sander ..............................................1
B. Dust Collection Hose ....................................1
C. Dust Collection Bag ......................................1
D. Wrench .........................................................1
E. Pneumatic Tool Oil Bottle .............................1
F.
1
/
4
" NPT Male Plug .......................................1
MODEL H8120
6" RANDOM ORBITAL SANDER
INSTRUCTION SHEET
EYE INJURY HAZARD!
Always wear safety glasses
when using this tool to
prevent serious personal
injury.
INJURY HAZARD!
Always disconnect tool from
air to prevent unexpected
operation during service.
DUST HAZARD!
Always wear respirator when
using this tool.
Figure 1
.
Model H8120 inventory.
Assembly
1. Install the
1
⁄
4
" NPT male quick-connect fitting
into the air inlet.
2. Attach a 6" hook and loop sanding disc to the
sanding pad as shown in
Figure 2.
A
D
Figure 2. Attaching sanding disc.
COPyRIgHT © JANUARy, 2007 By gRIzzly INDUSTRIAl, INC. RevISeD MAy, 2009 (TR)
WARNINg: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROvAL OF gRIZZLY INDUSTRIAL, INC.
#Bl8858 PRINTeD IN CHINA
DO NOT EXCEED 120 PSI!
Personal injury could
occur.
C
B
e
F
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
