Grizzly Industrial H8115 - Manual

Model H8115/H8117 Spray Gun -7- SECTION 2: INTRODUCTION If you have any comments regarding this manual, please write to us at the following address: Grizzly Industrial, Inc. C/O Technical Documentation P.O. Box 2069 Bellingham, WA 98227-2069 Email: [email protected] Most importantly, we stand behi...

Model H8115/H8117 Spray Gun -8- Customer Service #: (570) 546-9663 • To Order Call: (800) 523-4777 • Fax #: (800) 438-5901 TOOL DATA SHEET MINI SPRAY GUNS MODEL H8115/H8117 MODEL H8115 H8117 CUP SIZE 200ml 150ml TYPE OF FEED Gravity Gravity FLUID TIP 0.6mm 0.8mm AIR CONSUMPTION 1.8-2.5 CFM 5 CFM INL...

Model H8115/H8117 Spray Gun -9- SECTION 3: SET UP Figure 1. Model H8115 inventory. B C D Unpacking Your spray gun left our warehouse in a carefully packed box. If you discover the spray gun is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for ...

Model H8115/H8117 Spray Gun -10- 1. Fluid Control: Controls the volume of material that travels through the fluid tip. 2. Pattern Control: Adjusts the spray pattern from a round pattern to a wide fan. 3. Air Flow Control: Controls the fluid pressure inside the spray gun. 4. Atomizing Cap: Controls t...

Model H8115/H8117 Spray Gun -11- SECTION 4: OPERATIONS Spraying The Model H8115/H8117 is designed to spray liquids paints and lacquers that are low viscosity or have been thinned down. It is ideal for auto body touch-ups, wood-working projects, and projects with hard to reach areas. To use your spra...

Model H8115/H8117 Spray Gun -13- The atomizing cap needs to be adjusted for horizontal ( Figure 7 & 8 ) or verti- cal ( Figure 9 & 10 ) spraying patterns. Spraying in the opposite direction may lead to material build up on the atomizing cap horn. Many performance problems are caused by clogg...

Model H8115/H8117 Spray Gun -14- Figure 12. G6261 Campbell Hausfeld™ water filter. G6261— Campbell Hausfeld™ Water Filter Remove damaging water vapor before it reaches your pneumatic tools. This highly effective, five micron filter features a see- through bowl and easy in-line connections. 150 PSI m...

Model H8115/H8117 Spray Gun -15- SECTION 6: MAINTENANCE Cleaning Proper cleaning is the best way to ensure trouble free performance from your spray gun. If your gun is not thoroughly cleaned, damage and poor spraying will result. Problems caused by improper cleaning will not be covered by the warran...

Model H8115/H8117 Spray Gun -16- Lubrication Lubricate the following areas on the Model H8115 ( Figure 17 ) and Model H8117 ( Figure 18 ) with spray oil, grease, or petroleum jelly after cleaning. A. Atomizing Cap Threads B. Air Valve Packing C. Trigger Pin D. Air Flow Control Valve E. Pattern Contr...

Model H8115/H8117 Spray Gun -17- Troubleshooting Symptom Possible Cause Solution Fluttering or Spitting spray. 1. Dry or worn fluid tip seat per- mits air to seep into fluid pas-sage. 2. Material level too low. 3. Fluid tip or filter obstructed. 4. Dry needle packing. 1. Tighten fluid tip or replace...

Model H8115/H8117 Spray Gun -22- Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or ...

WARRANTY CARD Name _________________________________________________________________Street _________________________________________________________________City _______________________ State _________________________ Zip _________Phone # ____________________ Email ________________________ Invoice # ...

FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC.P.O. BOX 2069BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street________________________________ City______________State______Zip_______ Send a Grizzly Catalog to a friend: Place Stamp Here