Grizzly Industrial H8100 - Manual
Grizzly Industrial H8100 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Operation; Storage
- Page 3 – NOTICE
- Page 4 – Buy Direct and Save with Grizzly; ORDER
MODEL H8100
8 TON LOG SPLITTER
INSTRUCTION SHEET
Copyright © DECEMBEr, 2006 By grizzly inDustrial, inC. rEvisED May, 2009 (tr)
WaRNING: NO PORTION Of THIS MaNUaL May bE REPRODUCED IN aNy SHaPE
OR fORM WITHOUT THE WRITTEN aPPROvaL Of GRIzzLy INDUSTRIaL, INC.
(For MoDEls MFg sinCE 5/09) #ts8805 printED in China
EyE INJURy HazaRD!
always wear aNSI approved
safety glasses when using
this log splitter!
Inventory & Identification:
(figure 1)
a.
log splitter Main Body ............................... 1
b.
stabilizer Bars ............................................ 2
C.
return springs ........................................... 2
D.
Elevation Foot pedal .................................. 1
E.
hex Bolt M6-1 x 16 (foot pedal) ................. 1
f.
hex Bolts M10-1.5 x 25 (stabilizer bars) .... 4
G.
hex nuts M10-1.5 (stabilizer bars)............. 4
H.
lock Washers 10mm (stabilizer bars) ........ 4
I.
splitter Workbench ..................................... 1
J.
Wedge assembly ....................................... 1
K.
pressure release pedal ............................ 1
L.
Wedge release pins (one on each side) .. 2
assembly
Note:
Refer to the
Parts breakdown
for
additional assembly details.
1.
insert the elevation foot pedal into the hydrau-
lic pump bracket and secure it with the M6-1.0
x 16 hex bolt.
2.
attach the stabilizer bars to the base with the
M10-1.5 x 25 hex bolts, hex nuts, and lock
washers.
3.
install the return springs between the splitter
workbench and the base.
This log splitter is only intended to be used
to split logs! Serious injury may occur if this
log splitter is used for any other purpose.
If you need help with your new log splitter, call our
Tech Support at: (570) 546-9663.
Introduction
the Model 8100 8-ton log splitter will split logs
from 14
1
⁄
4
" to 23
1
⁄
4
", and the hydraulic 6" ram
stroke will separate the toughest grain.
figure 1.
Model h8100.
E
C
D
B
F, g, h
J
i
K
l
a
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Operation 1. Cut the logs you want to split to 23 1 ⁄ 4 " or less to fit into the splitter. 2. pull both of the wedge release pins out of the holes in the post, and lower the wedge to a height slightly more than the length of the log. Note: Make sure the wedge release pins are firmly seated in t...
1 2 3 4 20V2 21 38 33 34 35 36 39 5V2 10 7 8V2 9 10 11 12 13 14 15 18 17 22 23 25 24 29 31 28 26 30 16V2 16V2 37 REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PH8100001 THREADED PIN HOUSING 20V2 PH8100020V2 HYD. FOOT PEDAL V2.05.09 2 PH8100002 WEDGE RELEASE PIN 21 PB83M HEX BOLT M6-1 X 16 3 PH8100...
Buy Direct and Save with Grizzly ® – Trusted, Proven and a Great Value! ~Since 1983~ ORDER 24 HOURS A DAY! 1-800-523-4777 Visit Our Website Today For Current Specials!
