Grizzly Industrial H8071 - Manual
Grizzly Industrial H8071 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – setup
- Page 3 – NOTICE; operation safety
- Page 4 – operations
Copyright © JUNE, 2010 By grizzly iNdUstrial, iNC.
Warning: no portion of this manual may be reproduced in any shape
or form Without the Written approval of grizzly industrial, inc.
#Cr13012 priNtEd iN ChiNa
model h8071
drill press lathe
attachment
instructions
figure 1. h8071 drill press lathe attachment
specifications
tool rest length ............................................ 12"
Maximum Workpiece length (if reversed) ..... 24"
Maximum Workpiece diameter ........................ 6"
shank diameter of screw and spur Center ....
3
⁄
8
"
Construction Material .................................. steel
shipping Weight .......................................3.5 lbs.
introduction
the Model h8071 drill press lathe attachment
allows wooden workpieces to be turned on a drill
press in the same manner as a wood lathe. items
like small pickets, legs, spindles, handles, dowels,
and pins can be made. Fits drill press tables with
t-nut slots or with slotted through holes as shown
in
figure 1.
inventory
refer to the list and
figure 2 to inventory your
package. if you can't find an item on this list, check
the mounting locations or examine the packaging
materials carefully. occasionally we pre-install
certain components for shipping purposes.
if any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
description
Qty
a. tool rest .................................................... 1
b. Cap screw M8-1.25 x 20 ............................ 1
c. Cap screw M6-1 x 20 ................................. 1
d. tool rest Foot ............................................ 1
e. Carriage Bolt M10-1.5 x 40 ......................... 2
f. Base and live Center assembly ................ 1
g. Flat Washer 10mm ..................................... 2
h. hex Nut M10-1.5 ......................................... 2
i. hex Wrenches 5, 6mm .......................... 1 Ea
J. screw Center .............................................. 1
K. spur Center ................................................ 1
figure 2. inventory.
a
C
B
E
F
d
g
h
i
J
K
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
-2- h8071 drill press lathe attachment setup If you need help with your new drill press lathe attachment, call our Tech Support at: (570) 546-9663. tools needed Qty Wrench 17mm.................................................... 1 to setup the drill press lathe attachment: 1. at each end of the work...
h8071 drill press lathe attachment -3- Sandpaper Workpiece Wrapping the sandpa- per completely around the workpiece will pull your hands into the mov- ing workpiece and may cause injury. never wrap sandpaper completely around the workpiece! eye/face protection. Wear eye protection and a face shield ...
-4- h8071 drill press lathe attachment operations Follow all safety precautions in your drill press owner's Manual and these instructions. to use the drill press lathe attachment: 1. put on safety glasses, a face shield, and tie back loose clothing and hair. 2. disCoNNECt drill prEss FroM poWEr! 3. ...
