Grizzly Industrial H7949 - Manual

Page 2 - SAFETY; NOTICE

Safety Instructions For Pneumatic Tools 1. KEEP ALL SAFETY DEVICES IN PLACE and in working order. 2. REMOVE ADJUSTING KEYS AND WRENCHES . Form habit of check- ing to see that keys and adjusting wrenches are removed from tool before operation. 3. KEEP WORK AREA CLEAN . Cluttered areas and benches inv...

Page 3 - Safety Instructions For Pneumatic Tools

H7949/H7950/H7951 Nailer -1 - 10. USE PROPER AIR HOSE for the tool. Make sure your air hose is in good condition and is long enough to reach your work without stretching. 11. WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neck-ties, rings, bracelets, or other jew-elry which may get caught ...

Page 4 - Additional Safety Instructions for Nailers

H7949/H7950/H7951 Nailer -2 - 1. HAND INJURIES: Do not place your hands near the nail point of entry. A nail can deflect and tear through the surface of the workpiece, puncturing your hand or fingers. 2. COMBUSTIBLE GASES: Never connect the nailer to pressur-ized oxygen or other combustible gases as...

Page 6 - INTRODUCTION; Foreword

H7949/H7950/H7951 Nailer -4 - INTRODUCTION If you have any comments regarding this manual, please write to us at the following address: Grizzly Industrial, Inc. C/O Technical Documentation Manager P.O. Box 2069 Bellingham, WA 98227-2069 Email: [email protected] Most importantly, we stand behind ou...

Page 7 - SETUP; Unpacking; Inventory

H7949/H7950/H7951 Nailer -5 - SETUP Figure 1. Model H7949/H7950/H7951 inventory. Unpacking Your Model H7949/H7950/H7951 left our warehouse in a carefully packed box. If you discover the nailer is damaged after you have signed for delivery, please imme- diately call Customer Service at (570) 546-9663...

Page 10 - OPERATIONS; Loading Nails

H7949/H7950/H7951 Nailer -8 - OPERATIONS Model H7949/H7950 Loading Nails Use nails meeting the specifications listed for your nailer on Page 4 of this manual. To load nails in your nailer: 1. DISCONNECT NAILER FROM THE AIR SUPPLY! Point the nailer away from you and others when connecting the air sup...

Page 12 - Unloading Nails

H7949/H7950/H7951 Nailer -10 - Rotating Exhaust Cover The exhaust cover rotates as needed to direct the exhaust away from you. To rotate the exhaust cover: 1. Use the 4mm hex wrench to loosen the exhaust cover cap screw as shown in Figure 10 . Figure 10. Loosening the exhaust cap screw. 2. Rotate th...

Page 13 - Using the Nailer

H7949/H7950/H7951 Nailer -11 - Using the Nailer Before you operate your nailer, place five to six drops of air tool oil into the quick connect fitting where the nailer connects to the air supply. To operate your nailer: 1. Connect the air supply to the quick connect fitting on your nailer. 2. To tes...

Page 15 - Replacing

H7949/H7950/H7951 Nailer -13 - Replacing Pistons /O-Rings If you need to replace piston parts in your nailer, you can purchase a piston repair kit from Grizzly: call 1-800-523-4777. The Piston Repair Kit part number for Model H7949 is PH7949103; the Piston Repair Kit part number for Model H7950 is P...

Page 16 - CLEANING & LUBRICATING; Cleaning; Lubricating

H7949/H7950/H7951 Nailer -14 - CLEANING & LUBRICATING Cleaning Use an automotive grade solvent such as Sprayway C-60 ® (G2544 in the Grizzly catalog) to clean the nose assembly of the nailer. Always be sure that the nailer is dry before using it again. Do not allow dust, chips, or sand into the ...

Page 26 - TROUBLESHOOTING; Symptom

H7949/H7950/H7951 Nailer -24 - TROUBLESHOOTING Symptom Possible Cause Solution Air leaking at trig-ger valve area. 1. O-rings in trigger valve hous- ing are damaged. 1. O-rings must be replaced. Air leaking between housing and hose. 1. Loose screws in housing.2. Damaged O-ring.3. Loose air fitting. ...

Page 27 - WARRANTY AND RETURNS

Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance. This is Griz...

Page 29 - WARRANTY CARD

WARRANTY CARD Name _________________________________________________________________Street _________________________________________________________________City _______________________ State _________________________ Zip _________Phone # ____________________ Email ________________________ Invoice # ...

Page 30 - Send a Grizzly Catalog to a friend:; Place

FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC.P.O. BOX 2069BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street________________________________ City______________State______Zip_______ Send a Grizzly Catalog to a friend: Place Stamp Here

Grizzly Industrial H7949 - Manual

Table of Contents:

Summary

Other Grizzly Industrial Models