Grizzly Industrial H7792 - Manual

Model H7792/H7793/H7794/H7795 Cordless Drills -4 - Identification A. Charger B. Battery C. Bit D. Keyless Chuck E. Torque Setting Ring F. Direction Indicator G. Direction Switch H. Trigger I. Case Figure 1. Drill component identification. A B C D E F G B H I

Model H7792/H7793/H7794/H7795 Cordless Drills -5 - For Your Own Safety Read Instruction Manual Before Operating This Equipment The purpose of safety symbols is to attract your attention to possible hazard-ous conditions. This manual uses a series of symbols and signal words which are intended to con...

Model H7792/H7793/H7794/H7795 Cordless Drills -7 - 1. READ THE ENTIRE MANUAL: This manual contains proper operating instructions for this drill. 2. REMOVING/INSERTING BATTERY: Make sure the switch is in the lock (center) position before inserting or removing battery. 3. REMOVE BATTERY: Remove the ba...

Model H7792/H7793/H7794/H7795 Cordless Drills -9 - SECTION 2: OPERATIONS Removing /Installing Battery Remove the battery when changing bits, or to recharge the battery. To remove or install a battery: 1. Push the direction switch into the lock (center) position to prevent accidental starting. 2. Squ...

Model H7792/H7793/H7794/H7795 Cordless Drills -10 - 2. Push the direction switch in from the right side for clockwise rotation (for-ward). 3. Push the direction switch from the left side for counterclockwise rotation (reverse). 4. Pull the trigger and look at the lighted arrows on the top of the dri...

Model H7792/H7793/H7794/H7795 Cordless Drills -11 - Torque Settings The clutch is designed to slip at a preset torque to prevent damage to the tool or the screw, and to prevent driving screws too deep. Use lower torque settings for screw-ing into soft materials with short screws, and higher settings...

Model H7792/H7793/H7794/H7795 Cordless Drills -13 - SECTION 3: ACCESSORIES Figure 5. Our most popular safety glasses. G7984—Face ShieldH1298—Dust Sealed Safety GlassesH1300—UV Blocking, Clear Safety GlassesH2347—Uvex ® Spitfire Safety Glasses H0736—Shop Fox ® Safety Glasses Safety Glasses are essent...

Model H7792/H7793/H7794/H7795 Cordless Drills -14 - SECTION 4: MAINTENANCE Drill Maintenance The battery will require periodic recharg-ing, and eventually replacement after it has exceeded its recharge life (approxi-mately 800-1000 recharge cycles). You will notice extended charging times or shorten...

Model H7792/H7793/H7794/H7795 Cordless Drills -15 - Replacement Chargers and Batteries Model H7792: Replacement Battery: H8857Replacement Charger: H8858 Model H7793: Replacement Battery: H8861Replacement Charger: H8862 Model H7794: Replacement Battery: H8859Replacement Charger: H8860 Model H7795: Re...

Model H7792/H7793/H7794/H7795 Cordless Drills -16 - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs...

WARRANTY CARD Name _________________________________________________________________Street _________________________________________________________________City _______________________ State _________________________ Zip _________Phone # ____________________ Email ________________________ Invoice # ...

FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC.P.O. BOX 2069BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street________________________________ City______________State______Zip_______ Send a Grizzly Catalog to a friend: Place Stamp Here