Grizzly Industrial H7725 - Manual
Grizzly Industrial H7725 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
MODEL H7725
84" EURO STYLE
WORKBENCH-BIRCH
INSTRUCTIONS
Copyright © JULy 2009 By grizzLy indUstriaL, inC.
WaRNINg: NO pORTION Of THIS MaNUaL MaY BE REpRODUCED IN aNY SHapE
OR fORM WITHOUT THE WRITTEN appROvaL Of gRIzzLY INDUSTRIaL, INC.
(For modeLs manUFaCtUred sinCe 7/09) #Cr12019 printed in China
figure 1.
model h7725 Birch Workbench.
Safety & Limitations
•
maximum workbench table load is 500 lbs.
•
do not stand or climb on the workbench.
•
do not apply an unbalanced load on the table
that could result in the workbench tipping
over.
•
Keep unsupervised children away from the
workbench.
•
do not stand or climb on the workbench.
•
do not use workbench outdoors or in wet or
damp locations.
•
do not overload the vises or use cheater
pipes on the vise handles to increase lever-
age.
•
do not weld on this bench.
Specifications
Finish .......................................... Lacquer sealed
table thickness ............................................... 4"
Front Vise size ..................................... 19
3
⁄
4
" x 7"
end Vise size ............................................6" x 6"
overall size .............. 84
1
⁄
2
"W x 24
11
⁄
16
"d x 34
1
⁄
4
"h
tilt-out drawer size ......... 53
1
⁄
2
"W x 19"d x 14"h
storage shelf size .....................55
1
⁄
2
"W x 18
1
⁄
2
"d
shipping Weight ......................................332 lbs.
2.
position the right side leg (B) on the floor
so the Front arrow points to the front and
install two barrel nuts (e4) into cross brace (d
& e) as shown in
figure 3.
LR
E5
LB
BP
LL
LF
E1
E5
E1
LR
LB
BP
LL
LF
E1
E5
E5
E2
H8
H7
figure 2.
tilt-drawer assembly.
D
E
B
E2
E4
E3
Note: Slot
for Lock
Front
Slot
figure 3.
right leg and cross brace installation.
assembly
refer to the last page of these instructions to
inventory your shipment for ease of assembly.
To assemble the workbench:
1.
insert eight (e5) barrel nuts into panels (LF &
LB), and assemble the drawer with eight (e1)
screws in the orientation shown in
figure 2
.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
